SKC Inc.

Ghost Wipes (15 x 15-cm) for sampling metals on surfaces, moistened with deionized water, individually sealed packets, require 10 x 10-cm templates

Full Disclosure® Kit for Qualitative Analysis includes 11 pairs of nitrile gloves, 10 wipes, Disclosing Powder, extraction solution, deionized water, 10 sheets of waxed paper, and instructions; not designed for detecting lead in paint and paint chips, on painted surfaces, or embedded in material such as plastic; not suitable for lead chromate; wipes in kit conform to ASTM E1792.

NoiseCHEK Noise Dosimeter 5-pack Kit with Class 2 Calibrator, includes 5 each: dosimeters with intrinsic safety, without Bluetooth; 1 each: 5-unit charging dock with power supply, AcoustiCHEK Calibrator, replacement windscreen, USB cable, and USB drive with manual, in a protective charging carry case.

NoiseCHEK Noise Dosimeter 3-pack Kit with Class 2 Calibrator, includes 3 each: dosimeters with intrinsic safety, without Bluetooth; 1 each: 5-unit charging dock with power supply, AcoustiCHEK Calibrator, replacement windscreen, USB cable, and USB drive with manual, in a protective charging carry case.

NoiseCHEK Single Kit, includes dosimeter with intrinsic safety, 1-unit charging dock with power supply, USB cable, and USB drive with manual, in a protective carry case. Requires calibration using AcoustiCHEK Calibrator Cat. No. 703-002 sold separately.

AcoustiCHEK Calibrator Class 1, with built-in barometer, includes AA batteries and Certificate of Manufacturer Calibration.

AcoustiCHEK Calibrator, Class 2, for 1/2-inch microphones, includes AA batteries and Certificate of Manufacturer Calibration.

AirChek® XR5000 (Standard Power) 5-pack High Flow Pump Kit, includes five each: pumps with Li-Ion battery packs, screwdriver sets and Filter Cassette Holders; one Take Charge 5 Multi-charger, in a hard-sided case. Low flows from 5 to 500 ml/min require a low flow kit. AirChek XR5000 pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek XR5000 requires ¼-inch ID tubing.

The Disposable PPI® Sampler is a single-use plastic respirable dust sampler designed with four parallel impactors for precise sampling at 8 L/min that meets ISO 7708/CEN respirable criteria. It is preloaded with four porous plastic disc impaction substrates, one 37-mm 5.0-µm PVC collection filter preweighed to 5 decimals, and one cellulose support. Supplied in tamper-evident inner bag. The red color identifies it as an 8 L/min respirable model.

The Reusable PPI® Sampler is an aluminum respirable dust sampler designed with four parallel impactors for precise sampling at 4 L/min that meets ISO 7708/CEN respirable criteria. The orange color identifies it as a 4 L/min respirable model. Requires substrates, filters, and supports purchased separately.

The Disposable PPI® Sampler is a single-use plastic respirable dust sampler designed with four parallel impactors for precise sampling at 4 L/min that meets ISO 7708/CEN respirable criteria. Each PPI is preloaded with four porous plastic disc impaction substrates. Each requires a user-loaded 37-mm filter and support purchased separately. The orange color identifies it as a 4 L/min respirable model.

The Disposable PPI® Sampler is a single-use plastic respirable dust sampler designed with four parallel impactors for precise sampling at 2 L/min that meets ISO 7708/CEN respirable criteria. Each PPI is preloaded with four porous plastic disc impaction substrates. Each requires a user-loaded 37-mm filter and support purchased separately. The gold color identifies it as a 2 L/min respirable model.

The Disposable PPI® Sampler is a single-use plastic respirable dust sampler designed with four parallel impactors for precise sampling at 2 L/min that meets ISO 7708/CEN respirable criteria. It is preloaded with four porous plastic disc impaction substrates, one 37-mm 5.0-µm PVC collection filter preweighed to 5 decimals, and one cellulose support. Supplied in tamper-evident inner bag. The gold color identifies it as a 2 L/min respirable model.

AirChek® TOUCH 5-pack High/Low Flow Pump Kit, includes five each: pumps with Li-Ion battery packs, screwdriver sets, Charging Cradles (4 Standard and 1 e-Cradle), Filter Cassette Holders, All-in-One Adjustable Tube Holders, and Type A Protective Tube Covers; one each: Multi-cradle power supply with cord and USB cable for use with free DataTrac® Pro Software download, in a hard-sided case. AirChek TOUCH pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek TOUCH requires ¼-inch ID tubing.

AirChek® TOUCH Single High/Low Flow Pump Kit. includes one each: pump with Li-Ion battery pack, screwdriver set, Standard Charging Cradle, power supply with cord, Filter Cassette Holder, All-in-One Adjustable Tube Holder, and Type A Protective Tube Cover, in a soft-sided nylon carry case. Connectivity to PC requires 877-93 or 220-900. AirChek TOUCH pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek TOUCH requires ¼-inch ID tubing.

AirChek® TOUCH Pump with Li-Ion battery pack and screwdriver set. Requires charging cradle and power supply. Connectivity to PC requires 877-93. Low flows from 5 to 500 ml/min require a low flow kit. AirChek TOUCH pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek TOUCH requires ¼-inch ID tubing.