Kingsmill Industries

Rod to Cable Clamps (GUV Type) are designed to join various sizes of cable to earth electrodes/rebars etc. They have a high resistance to corrosion and are mechanically strong to ensure a lasting connection. Features: Material: High Tensile Copper Alloy (body), 99.9% HD Copper (‘U’ bolt) Standard: BS:EN 62561-1, Class H Tightening Torque: 12Nm More Information: For installing lightning earthing system applications, We recommend the use of Copper earth electrode systems due to their inherent low resistivity and corrosion resistance. Materials used in earthing systems must be able to: Withstand mechanical damage, Resist corrosion Provide a low impedance path to earth Carry the maximum fault condition for the application/installation. For protective earth networks and lightning protection applications our range encompasses: Copper earth rod, earthing pole, copper bonded ground rod, earth ground rod, earth rod connector, earth rod cover, earth fitting, earthing studs, ground clamps for ground rod, ground pole and grounding post. Our castings are high quality/high copper content complying to BS 7430 and BS 62561-1. Additional to our range are UL listed copperbond earth rods and exothermic welding.

Rod To Tape Type ‘U’ Bolt Single Plate Clamps are designed to join various sizes of conductor tape to the earth electrode. Features: Material: High Strength Copper Alloy (body), 99.9% HD Copper (‘U’ bolt) Standard: BS:EN 62561-1 Class H, BS 7430 Tightening torque: 12Nm More Information: The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection. For installing lightning earthing system applications, We recommend the use of Copper earth electrode systems due to their inherent low resistivity and corrosion resistance. Materials used in earthing systems must be able to: withstand mechanical damage, resist corrosion, provide a low impedance path to earth, and carry the maximum fault condition for the application/installation. For protective earth networks and lightning protection applications our range encompasses: Copper earth rod, earthing pole, copper bonded ground rod, earth ground rod, earth rod connector, earth rod cover, earth fitting, earthing studs, ground clamps for ground rod, ground pole and grounding post. Our castings are high quality/high copper content complying to BS 7430 and BS 62561-1. Additional to our range are UL listed copperbond earth rods and exothermic welding.

Earth Bars with Twin Disconnecting Links are supplied with a powder-coated base and M10 connections as standard. Available in copper or tinned. Brass bolts are provided as standard for plain copper bars. Stainless steel bolts are provided as standard for tinned copper bars. For phosphor bronze add /PB suffix to the part numbers above. Other sizes and connections are available on request. Features: Material: Copper or tinned copper (bar), Powder-coated steel (base) Standard: BS 7430 More Information: The Twin Disconnecting Links are mainly used to offer a temporary break in the connection to the earth allowing the inspection and testing of multiple Earth Rods/systems while disconnecting them from the Lightning Protection and Earthing system. Standard Earth Bars meet the requirements of most applications. However, we can design and manufacture an Earth Bar to suit special applications. Send your specification to us and we will design a bespoke Earth Bar. This design is checked and confirmed by you before work commences. Our standard Earth Bar Bases feature pre-drilled fixing holes for ease of installation and can be supplied powder-coated to reduce the risk of corrosion. All Earth Bars are manufactured in our dedicated UK factory with a high level of quality control that ensures consistency.

Tee Clamps are designed for a three-way connection of lightning protection or earthing conductor. Features: Material: Copper alloy/aluminium Standard: BS:EN 62561-1, Class H Tightening torque: 12Nm More Information: When choosing a connector it is important to ensure: The connector is mechanically robust. The connector is selected according to its application. The connector is rated for its application. To avoid bimetallic corrosion: use a bimetallic connector (do not connect bare copper directly to bare aluminium, or have water run-off from copper fall onto aluminium).

Square Clamps provide a four-way connection and are suitable for crossing over lightning protection cables in straight-through joints or ‘T’ connections to form a continuous cable network. Countersunk hole in the base for fixing the clamp in place. Features: Material: Aluminium/copper alloy Standard: BS:EN 62561-1, Class H Tightening torque: 6Nm More Information: When choosing a connector it is important to ensure: The connector is mechanically robust. The connector is selected according to its application. The connector is rated for its application. To avoid bimetallic corrosion: use a bimetallic connector (do not connect bare copper directly to bare aluminium, or have water run-off from copper fall onto aluminium).

Rod To Tape Couplers is used in conjunction with Side Mounted Brackets. Features: Material: Gunmetal / Aluminium Standard: BS EN 62561-1, CLASS H More Information: Can be used in the installation of a Conventional Air Termination Network. Conventional Air Terminals offer a quick and easy solution for Air Terminals of 0.5m to 3.0m in height.

Rod To Tape Couplers is used in conjunction with Side Mounted Brackets. Features: Material: Gunmetal / Aluminium Standard: BS EN 62561-1, CLASS H More Information: Can be used in the installation of a Conventional Air Termination Network. Conventional Air Terminals offer a quick and easy solution for Air Terminals of 0.5m to 3.0m in height.

Standard Earth Bars are an efficient and convenient way of providing a common earth point. Standard Earth Bars are supplied with a powder-coated base as standard. The standard connections are M10. Available in copper and tinned copper. Brass bolts are provided as standard for plain copper bars. Stainless steel bolts are provided as standard for tinned copper bars. For phosphor bronze add /PB suffix to the part numbers above. Other sizes are available on request. Features: Material: Copper or tinned copper (bar), Powder-coated steel (base) Standard: BS 7430 More Information: Standard Earth Bars meet the requirements of most applications. However, we can design and manufacture an Earth Bar to suit special applications. Send your specification to us and we will design a bespoke Earth Bar. This design is checked and confirmed by you before work commences. Our standard Earth Bar Bases feature pre-drilled fixing holes for ease of installation and can be supplied powder-coated to reduce the risk of corrosion. All Earth Bars are manufactured in our dedicated UK factory with a high level of quality control that ensures consistency.

SMARTPOLE brings adaptability and additional functionality to street lighting schemes. These bespoke columns can be adapted into user-friendly pedestrian crossing points, intelligent public information points for Wi-Fi hubs. Or they can be fitted with Electric Vehicle (EV) Charging Points allowing allowing the street lighting engineer to bring the advantages of both lighting and EV charhing in one solution. Kingsmill Lighting Columns are lightweight, strong, durable, corrosion resistant, easy to install and 100% recyclable. They comply with BS:EN 40-7. They offer a perfect foundation for street lights or any innovative projects, with potential for electric vehicle charging points, public safety features, solar PV panels, and added intelligence.

DECORPOLE incorporates a decorative base, providing an elegant silhouette to blend in with the classic architecture. Through changing the base and the colour of the lighting column they can be blended into a traditional (historic) lighting setting in both conservation and shopping areas. Kingsmill Lighting Columns are lightweight, strong, durable, corrosion resistant, easy to install and 100% recyclable. They comply with BS:EN 40-7.

Manufactured with high strength parameters and complying with BS:EN 40-7, BASICPOLE columns are available in a wide range of RAL colours. Kingsmill Lighting Columns are lightweight, strong, durable, corrosion-resistant, easy to install, and 100% recyclable. They comply with BS:EN 40-7. The columns have limitless capacity for the customisation of street lighting, park, amenity and garden lighting schemes, through changing their colours. Our SMARTPOLE and DECORPOLE ranges offer a perfect foundation for street lights or any innovative landscapping projects, with potential for electric vehicle charging points, public safety features, solar PV panels, and added intelligence. Features: Top diameter of 60mm Variety of heights and colours Easy to assemble Passive Safety Available in different RAL colours More Information: Advantages of Composite Columns – Composite lighting columns have many advantages over conventional metal columns, due to their manufacturing materials and process. Kingsmill columns are constructed from glass fibre polymer with a gel coating protecting the entire column. This produces a lightweight structure that is easy to install and extremely durable, perfect for areas with a high corrosion potential. Aesthetics– Unlike traditional steel lighting columns, composite columns offer a wide range of customisation options, not least colour choice. Manufactured as standard to resemble conventional metal columns, the Kingsmill lighting column can be produced in a wide range of colours to suit any aesthetic. Not only can the columns be supplied coloured, but the Kingsmill lighting column offers the revolutionary possibility to add graphics to the body of the column. With endless possibilities for design, the column offers boundless flexibility and personalisation to suit any environment. Corrosion Resistance – Kingsmill lighting columns are highly corrosion resistant due to their composite materials and gel coating. This provides a smooth, UV resistant surface that is easy to clean. Dirt, glue residue and graffiti are all easy to remove from the column as acetone solvents don’t damage the surface. The high quality materials used in production ensure UV resistance, preventing sun damage to the column and any added graphics. Due to the fact that the composite column has no metal parts, especially if root mounted, the Kingsmill Lighting Column is rust and corrosion resistant, additionally resisting the effects of road salts, animal urine and traffic pollution. This leads to a column lifespan of 40+ years. Electrical Safety – The electrical components inside the column are protected as the column has a reduced dew point, stopping icing and preventing moisture from damaging the internal electrical components. When combined with the non-conductive nature of the column itself, this produces a safe environment for electrical components with minimal risk of electrocution in the event of an electrical fault. Vandal Resistance – Kingsmill Lighting Columns are made from composite material. Unlike traditional metal columns they have no scrap value. This acts as a powerful theft deterrent, including of the access door. The columns are also graffiti and vandal resistant. Paint and adhesives are easily removed with acetone solvent that will not damage the gel coat. Our composite columns resist fire and mechanical damage potentially caused by malicious vandalism. Logistics – The composite materials used to produce the lighting column result in a much more lightweight structure than a traditional steel pole – an 8 metre column weighs only 50kg. Columns can be easily handled by two people, reducing the necessity for large installation equipment and shortening the installation times. This in turn vastly reduces the installation cost compared to conventional metal columns. When combined with the reduced transportation cost and smaller foundations required to mount the columns, the advantages of composite lighting columns over metal poles become clear. Environment – Manufactured from glass fibre polymer, the Kingsmill Lighting Column is 100% recyclable. Manufacturing methods also have low CO2 emissions, resulting in minimal environmental impact. Additionally, due to the ease of transportation and assembly of the columns, the environmental impact of installing them is also significantly lower than traditional lighting columns. Since they are made of GFP material, the lighting columns do not cause interference to radio waves, microwaves, radars or other airport infrastructure. This makes them the perfect solution for such projects, minimising the impact of the lighting chosen on necessary infrastructure.