Filtration Engineering & Consultants (FEC)

Mask PFE Test Machine: F2299/F2299M ? 03 (Reapproved 2017) / IS 16289- IS 9473:2002, EN 149 Penetration of Filter Material as per IS 9473:2002 · Sodium Chloride Test - Nacl Test · Paraffin Oil Test –PAO Test · Sodium Chloride : Aerosol Penetration System (NaCl) · Equipment Based with Compressed air Filter and Regulator Unit · Inlet Pressure : Maximum 10 Kg/ cm2 · Regulated Pressure : 0 – 10 Kg/ cm2 · Pressure Gauge with range of Pressure 10 Kg/ cm2 · Filter element : 25 µ · Required Constant Pressure of 7 bar · Paraffin Oil Penetration System (PAO) FEC Offer The Filter Mask Testing Equipment for R&D of Filter media, Mask Filter Media used in medical or Industrial application, quality control validation. As per International Standard. Application : It is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of fabrics and medical protective masks to the constant flow of airflow. Test Equipment as per National & International specific Test Standard Performance of Materials Used in Medical Face Masks as per ASTM F 2299 / EN 14683 / IS 16289 Equipment is Touch Screen Operated with one Nose Particle counter Made in Germany 0.15 to 94 Microns 128 Channels world class Optical Particle Counter.

All structure will be fabricated with GI Sheet and and frame will be made from M.S. Pipe work with automotive paint and Epoxy paint. · Lighting arrangement for test rig for working the dark also · Including Pressure Gauges for In-let and Out-let Pressure, Flow Meter for set the desired Flow · Absolute filter media holder for absolute filter as per ISO 4020-6.4 · Upper plate form made from stainless steel sheet with S.S washbasin type tray with drainage · All pipes for Test circuit will be made from seam less S.S or Cupper pipe and long band provided as per international specification. · For main circuit pump will be provided as per specification which can not be disturbed any actual particle size · Reservoir Made from Stainless Steel Conical as per specification standard · Smoothly flow adjustable regulator for increase and decrease the flow of oil

A Bubble Point test method applicable to filter elements used in Hydraulic fluid power system the concepts of filtration rating, efficiency or retention capacity and should be used for information only. Pressure at which the first bubble stream appears when a filter element is tested using the method specified in this International Standard. Verification of fabrication integrity defines the acceptability of the filter elements for further use or testing. The first bubble point is established through continuation of the fabrication integrity test. It is under no circumstances a functional characteristic of a filter element; in particular, it cannot be used for extrapolation to the concepts of filtration rating, efficiency or retention capacity and should be used for information only.

The Multi Pass test stand is mainly used for testing the performance of Fuel filters according to ISO 19438 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements. In order to determine such characteristics, filter elements are injected with continuous contaminant (test dust), whereas online particle sensors measure the contamination, thus making the evaluation of the filter element's performance possible. This test stand is automatically Test Report generated through software controlled by a computer chart and all the test parameters can be displayed on the screen. Data handling and generation of reports according to the standards mentioned above are included

All structure will be fabricated with GI Sheet and and frame will be made from M.S. Pipe work with automotive paint and Epoxy paint. · Lighting arrangement for test rig for working the dark also · Including Pressure Gauges for In-let and Out-let Pressure, Flow Meter for set the desired Flow · Absolute filter media holder for absolute filter as per ISO 4020-6.4 · Upper plate form made from stainless steel sheet with S.S washbasin type tray with drainage · All pipes for Test circuit will be made from seam less S.S or Cupper pipe and long band provided as per international specification. · For main circuit pump will be provided as per specification which can not be disturbed any actual particle size · Reservoir Made from Stainless Steel Conical as per specification standard · Smoothly flow adjustable regulator for increase and decrease the flow of oil.

Burst Pressure Test of Complete Filter as per ISO 4548-6 for automotive spin on filters These test methods describe laboratory testing of filters to prove their mechanical integrity. Filters are tested to determine the high pressure of the housing material and construction. These test simulate conditions of engine lubrication system. The test condition value should correspond with those actually measured on the intended engine applicable when such information is available. Feature: Digitally temperature indicator cum controller Digital pressure indicator Maximum Filter Burst Capacity 50.0 Kg/cm2 Top made from stainless steel with drainage pipe. Six digits preset counter with adjustable button as per required pulses. Programmable timer for set the sequence the pressure resolution 0.1 sec. Automatic impulse testing machine after set the desired pulses. Fabrication outer body frame made from M.S Pipe and c

The test procedures for both inlet and outlet anti-drain valves are described. Test A covers the essential basic performance of the valve in terms of its function as an anti-drain feature. Test B covers the basic performance. Test and additional procedures suggested ascertaining supplementary performance.

All structure will be fabricated with GI Sheet and and frame will be made from M.S. Pipe work with automotive paint and Epoxy paint. · Lighting arrangement for test rig for working the dark also · Including Pressure Gauges for In-let and Out-let Pressure, Flow Meter for set the desired Flow · Absolute filter media holder for absolute filter as per ISO 4548 · Upper plate form made from stainless steel sheet with S.S washbasin type tray with drainage · All pipes for Test circuit will be made from seam less S.S or Cupper pipe and long band provided as per international specification. · For main circuit pump will be provided as per specification which can not be disturbed any actual particle size · Reservoir Made from Stainless Steel Conical as per specification standard · Smoothly flow adjustable regulator for increase and decrease the flow of oil

These test methods describe laboratory testing of filters to prove their mechanical integrity. Filters are tested to determine the pressure impulse of the housing material and construction. These test simulate conditions of engine lubrication system cyclic pressure pulsation. The test condition value should correspond with those actually measured on the intended engine applicable when such information is available.

The multi pass test stand is mainly used for testing the performance of hydraulic filters according to 4548-12 and ISO 16889 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements. In order to determine such characteristics, filter elements are injected with continuous contaminant (test dust), whereas online particle sensors measure the contamination, thus making the evaluation of the filter element's performance possible. This test stand is automatically Test Report generated through software controlled by a computer chart and all the test parameters can be displayed on the screen. Data handling and generation of reports according to the standards mentioned above are included. Applicable tests The test stand is designed as a Multi Pass Test Stand acc. to ISO 4548-12 and ISO 16889 as a part of the filter manufacturing and quality monitoring he multi pass test stand is mainly used for testing the performance of hydraulic filters according to 4548-12 and ISO 16889 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements. In order to determine such characteristics, filter elements are injected with continuous contaminant (test dust), whereas online particle sensors measure the contamination, thus making the evaluation of the filter element's performance possible. This test stand is automatically Test Report generated through software controlled by a computer chart and all the test parameters can be displayed on the screen. Data handling and generation of reports according to the standards mentioned above are included. Applicable tests The test stand is designed as a Multi Pass Test Stand acc. to ISO 4548-12 and ISO 16889 as a part of the filter manufacturing and quality monitoring.

BS EN 779 Air Cleaner Filter Test Rig

BS EN 1822 Air Cleaner Filter Test Rig

ISO 16890 Air Cleaner Test Rig

IS 17570 HVAC Air Cleaner Filter Testing Equipment

Road Vehicles-Air Filters for Passenger compartments- ISO 11155 Part 1: Test For Particulate Filtration This part of ISO/TS 11155 specifies a particulate filtration test, including the critical characteristics of equipment, test procedure and report format, for the consistent of filter elements in a laboratory test rig with particle sizes larger than 0,3 um. It is applicable to filters for removing particulates matter from external or recirculated air used for ventilating motor vehicle passenger compartments or cabins.

Equipment is operating computerized operating with Scada software based operating system, with imported Germany particle particle counter direct reading on Computer screen Like Initial Pressure drop, Final Pressure Drop, Dust Holding capacity, Flow v/s. Pressure Restriction, Particle data, Also can operate Run & Stop of Equipment, Flow Set, Dust Feed, Reverse Cleaning, and see the Data of Dust Feed with Graph, Data with Graph Flow v/s. Pressure Restriction, and particle counter data… Dust Feeder Specification : Pneumatic Operated Special Design for easy to operate On-Line Dust weigh process with solenoid valve Timer for set the dust feed Quantity Tank synthetic Dust capacity 500 gms. Dust tank Transparent Body for Viewing the quantity of Dust Including – Pressure Regulator, Pressure Gauge, Solenoid Valve

FEC Offer The Air filter Test rig As per International Standard in various type of Capacity Like 5,000, 6,000, 7000 Cfm to 10,000 Cfm other lower and higher capacity is also available on customer demand we can test on this equipment Life & Efficiency test , Dust holding Capacity, Pressure Restriction Test , pressure drop, flow etc. as per EN 779 Test standard. Features of Air Filter Test Rig All Test Rig Will be made From M.S Round Pipe Main Structure made from Square M.S Pipe / Aluminum Extruder Pipe with Automotive paint Air filter test rig adhere on ISO 5011 Imported Digital Diff Pressure Mono Meter MS / SS round pipe for main Rig Temperature and Humidity indicator One Set of convergent and divergent unit for Absolute filter Housing Two Nos Butter fly valve for main flow adjust and By Pass Air High Speed Centrifugal blower All Test rig Will be Fitted on a Square MS Base Structure One Nos housing for hold the Absolute filter with clamp Equipment Operated with Scada software or PLC based HMI Operated as per customer requirement By pass Valve and Air flow butter fly valve will be provided Silencer and VFD for low Noise fitted with Blower One Nos Motor make Crompton Greaves / ABB /branded Electric Panel for the above Digital Differential Pressure Indicator Flow sensing Device with sensor Temperature and humidity Sensor Absolute Filter Housing Pneumatic Operated.