JM Eagle

JM Eagle’s medium-density polyethylene yellow gas pipes are suitable for use in multiple applications for gas distribution.

JM Eagle's high-density polyethylene water and sewer pipe is available in 3/4-inch to 63-inch diameters. The product’s physical properties make it applicable to open-trench, horizontal directional drilling, pipe-bursting and slip-lining installations. It can be manufactured with the color striping to identify application, such as a blue stripe for potable water, a green stripe for sewer applications and a purple stripe for reclaimed water. It is available in IPS (iron pipe size) and DIPS (ductile iron pipe size).

A duct made from high-density polyethylene, designed for protecting communication cables.

JM Eagle’s high-density polyethylene black pipe for gas is suitable for use in multiple applications for distribution, and oil and gas gathering.

JM Eagle’s Eagle Corr PE Dual Wall pipe is suitable for use in gravity flow drainage in DOT/capitol improvement, residential, commercial, recreational, agricultural and irrigation applications.

A plumbing pipe designed for solvent welding, ensuring leak-proof joints and ease of installation.

A pressure-rated pipe suitable for various plumbing applications, offering high strength and reliability.

A pipe suitable for both plumbing and irrigation applications, ensuring leak-proof joints and ease of installation.

A pipe designed for irrigation systems, offering high strength and resistance to environmental stress.

A range of fittings made from polyethylene, compatible with JM Eagle's electrical conduit pipes.

JM Eagle’s Eagle Green PE Dual Wall pipe is suitable for use in gravity flow drainage in residential, commercial, recreational, agricultural and irrigation projects where recycled materials are preferred and permitted.

JM Eagle's Ultra Blue™ pipes conform to the AWWA C909 and/or ASTM F1483 specifications, with gaskets meeting ASTM F477 and joints in compliance with ASTM D3139. Long-term hydrostatic pressure tests show Ultra Blue™ has a Hydrostatic Design Basis of 7,100 psi. Conventional PVC pressure pipe has an HDB of 4,000 psi. With equivalent safety factors the wall thickness of Ultra Blue™ can be reduced to approximately half that of conventional PVC pipe and still maintain the same pressure rating and meet the high safety requirements commonly needed by municipal water systems. Pipe is available in Cast Iron O.D.s (CIOD) in 6" - 12" PC 235 psi; 16" PC 165 psi. Pipe is also available in Iron Pipe Size O.D.s (IPS) in 6" - 12" PR 200 psi.

Easy-Liner is made from JM Eagle’s Ultra Corr sewer pipe, a direct-bury product, in 24-, 27-, 30- and 36 inch diameters. It can be used in for jack-and-bore casing sections under railroads, interstates or other structures, as well as in rehabilitating concrete, clay tile or brick sewer lines. It comes in laying lengths of 12 feet. It serves as a slipline in failing pipe with minimal equipment and without bypass pumping of the sewer main. Easy-Liner can be used in conjunction with Ultra Corr direct-bury pipe. It typically requires only a small backhoe for lifting and pushing in installation.

A pipe system designed for well construction, providing protection and support for water wells.

A pipe system designed for well construction, providing protection and support for water wells.

JM Eagle’s Blue Brute™ C900 water pipe, produced in blue or white, conforms to the AWWA C900 specification, with gaskets meeting ASTM F477 and joints in compliance with ASTM D3139. Blue Brute™ water pipe has the long-term hydrostatic strength to meet the high safety requirements commonly needed by municipal water systems. This pipe conforms to AWWA C900-07 and FM 1612; Pressure Class 165 psi (DR 25), 235 psi (DR 18)*; 305 psi (DR 14)*; for sizes 4" - 48" in diameter.