TEKEN44 — Connecting Industries Through Standards and Certified Products

At TEKEN44, we bring together manufacturers, laboratories, and professionals through shared engineering and quality standards. Our mission is to make global standards accessible and visible — turning technical compliance into real-world performance.

Below you'll find the Top 10 Industry Standards most widely adopted across manufacturing and technology sectors, reflecting the benchmarks that define reliability, safety, and innovation worldwide.
19945
Total Standards Analyzed
812
Total Manufacturers
3304
Total Products
Related Standards AnalysisStandards adopted by manufacturers using: ASME B16.3414118630 14ASME B16.349API 6D5ISO 172924API 6024API 5983EN 12516-13BS 18733API 6A3ISO 143133API 600#1
ASME B16.34
Valves--Flanged, Threaded, and Welding End...

Top Manufacturers Using This Standard

FRI
FRI
Habonim
Habonim
Israel
Maverick Valves
Maverick Valves
LESER
LESER
Germany
LeadValve
LeadValve
China
GWC International
GWC International
Italy
AMPO POYAM VALVES
AMPO POYAM VALVES
Spain
Arflu
Arflu
Spain
Delta Pacific Valve Mfg. Co.
Delta Pacific Valve Mfg. Co.
United States
Alfa Valvole
Alfa Valvole
Italy
Alfa Valve
Alfa Valve
Portugal
Goodwin International Limited
Goodwin International Limited
Pekos Valves S.L.
Pekos Valves S.L.
KF Valves
KF Valves

Example Products Using ASME B16.34

Pressure Seal Gate Valves
Pressure Seal Gate Valves
FRI
View Product →
Bolted Bonnet Gate Valves
Bolted Bonnet Gate Valves
FRI
View Product →
Z28Q
Z28Q
Habonim
High Pressure High Temperature Class 2500, full differential pressure for sizes up to and including 2″ (DN50), differential pressure of up to 255 bar (3700 psi) for sizes 2½” (DN65) and above with hybrid seats. Pressure containing parts are in compliance with ASME B16.34, for wall thickness, design type-tested for burst testing of four times the pressure rating for 5 minutes. A one-size-up stem made of high tensile material complies with ASME B16.34 and API 6D for drive train requirements provides a sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit which provides bubble tight shut-off (Rate A), combined with lower operating torque.
View Product →
Trunnion Ball Valves Fully Welded Body
Trunnion Ball Valves Fully Welded Body
Maverick Valves
Trunnion ball valves have the obturator bounded by trunnions which do not allow axial displacements of the ball itself in the flow direction; line pressure compresses the seat onto the ball, the contact between surfaces generates the valve sealing; trunnion standard construction ensure automatic cavity relief in case of overpressure in body cavity; these valves can be selected for a wide range of applications with no specific limits to sizes and pressures. Fully welded constructions, both flanged or with welded ends, are a preferable solution when no maintenance is required on above ground or below ground (buried) installations and allows a real 0 leakage feature.
View Product →
Trunnion Ball Valves Side Entry Modular (DBB)
Trunnion Ball Valves Side Entry Modular (DBB)
Maverick Valves
View Product →
Clean Service Type 485
Clean Service Type 485
LESER
Safety valve with pipeline integration for safeguarding high-purity applications
View Product →
Trunnion Ball Valve
Trunnion Ball Valve
LeadValve
trunnion mounted ball valves feature: a full line product offering with valves ranging in 2"-42", ANSI classes 150LB - 2500LB, forged steel bolted or all welded body, close coupled trunnion block design for low operating torques, secondary seat sealant feature.API-6D valves are offered with self relieving seats or optional double piston sealing. Special seat compounds are also available. Each valve meets, API-6D, API 6FA and Nace requirements. Options include stem extensions, actuators, pipe pups and specialized coatings.
View Product →
Power Station Gate Valve
Power Station Gate Valve
LeadValve
The Power Station Gate Valve is a type of valve used primarily in the power industry for controlling the flow of fluids. It utilizes a gate (or wedge) as the closing mechanism, which moves up and down to open or close the flow path. Power station gat...
View Product →

+ 32 more products available

Related Standards AnalysisStandards adopted by manufacturers using: API 6D12107520 12API 6D9ASME B16.346ISO 172925ISO 143134API 6A3API 6073API 5983API 5942ISO 104232API 608#2
API 6D
Specification for Pipelineand Piping Valves Twenty...
Purchase Standard

Top Manufacturers Using This Standard

MIR Valve
MIR Valve
Malaysia
BEL Valves
BEL Valves
Maverick Valves
Maverick Valves
LeadValve
LeadValve
China
GWC International
GWC International
Italy
Arflu
Arflu
Spain
BAC Valves
BAC Valves
España
Delta Pacific Valve Mfg. Co.
Delta Pacific Valve Mfg. Co.
United States
Alfa Valvole
Alfa Valvole
Italy
Goodwin International Limited
Goodwin International Limited
Pekos Valves S.L.
Pekos Valves S.L.
KF Valves
KF Valves

Example Products Using API 6D

MV1 TOP-ENTRY BALL VALVES
MV1 TOP-ENTRY BALL VALVES
MIR Valve
https://www.mirvalve.com/products/mv1-top-entry-ball-valves
View Product →
Midstream Pipeline Gate Valves
Midstream Pipeline Gate Valves
BEL Valves
View Product →
Onshore Check Valves
Onshore Check Valves
BEL Valves
BEL Valves’ Check Valve range supports client needs for a flexible approach to solutions where protection against backflow and pressure surges are concerned. The robust design of the Swing Check Valve is typically favoured to overcome these service conditions on large bore applications, whereas the Axial and Piston Check Valve products provide assurance where more compact design is demanded.
View Product →
Trunnion Ball Valves Fully Welded Body
Trunnion Ball Valves Fully Welded Body
Maverick Valves
Trunnion ball valves have the obturator bounded by trunnions which do not allow axial displacements of the ball itself in the flow direction; line pressure compresses the seat onto the ball, the contact between surfaces generates the valve sealing; trunnion standard construction ensure automatic cavity relief in case of overpressure in body cavity; these valves can be selected for a wide range of applications with no specific limits to sizes and pressures. Fully welded constructions, both flanged or with welded ends, are a preferable solution when no maintenance is required on above ground or below ground (buried) installations and allows a real 0 leakage feature.
View Product →
Trunnion Ball Valves Side Entry Modular (DBB)
Trunnion Ball Valves Side Entry Modular (DBB)
Maverick Valves
View Product →
Trunnion Ball Valve
Trunnion Ball Valve
LeadValve
trunnion mounted ball valves feature: a full line product offering with valves ranging in 2"-42", ANSI classes 150LB - 2500LB, forged steel bolted or all welded body, close coupled trunnion block design for low operating torques, secondary seat sealant feature.API-6D valves are offered with self relieving seats or optional double piston sealing. Special seat compounds are also available. Each valve meets, API-6D, API 6FA and Nace requirements. Options include stem extensions, actuators, pipe pups and specialized coatings.
View Product →
Floating Ball Valve
Floating Ball Valve
GWC International
Side-Entry (split-body) two or three pieces bolted construction, Seat-supported ball, renewable seats, Full or Reduced Bore, Bi-Directional.
View Product →
Trunnion Mounted Side Entry Twin Ball Valve
Trunnion Mounted Side Entry Twin Ball Valve
GWC International
Side-Entry (split-body) three pieces standard bolted body or compact design construction, Trunnion-supported, Floating seats spring energized, Full or Reduced Bore, Bi-Directional. Different Type of Bleed Connection is available: plugged, complete with blind flange or with needle / floating / trunnion valve.
View Product →

+ 21 more products available

Related Standards AnalysisStandards adopted by manufacturers using: EN 33112107520 12EN 3314EN 138283EN 4373PED 2014/68/...2ISO EN 228-11SII 1004-11SII 11441SII 16071NF E29-1401NF E 29-135#3
EN 331
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
Purchase Standard

Top Manufacturers Using This Standard

Sagiv
Sagiv
Israel
Effebi S.p.A.
Effebi S.p.A.
Italy
Giacomini S.p.A.
Giacomini S.p.A.
Italy
Bonomi Industries
Bonomi Industries
Italy
ITAP S.p.A.
ITAP S.p.A.
Italy
IVR S.p.A.
IVR S.p.A.
WESA-Armaturen GmbH
WESA-Armaturen GmbH
Fratelli Pettinaroli S.p.A.
Fratelli Pettinaroli S.p.A.
TECOS srl
TECOS srl
ITALY
Valvosanitaria Bugatti S.p.A.
Valvosanitaria Bugatti S.p.A.
Italy
Cimberio S.p.A.
Cimberio S.p.A.
Italy

Example Products Using EN 331

Gas Safety Ball Valve
Gas Safety Ball Valve
Sagiv
Quality Natural gas valves and LPG valves. Based on the ball valve principle, this diverse series of gas valves assures maximum security and full dependability. Yellow line valves carry the certification of leading international regulatory bodies in the industry.
View Product →
Wall valve for gas devices control with fixing foot
Wall valve for gas devices control with fixing foot
View Product →
Alternative shut-off valve 1/4 turn flat seal type CM73
Alternative shut-off valve 1/4 turn flat seal type CM73
View Product →
Venus
Venus
Effebi S.p.A.
A valve designed for gas applications, operating within temperature limits from –20°C to +60°C, with pressure limits up to MOP5.
View Product →
Venus Angle with Nut
Venus Angle with Nut
Effebi S.p.A.
A gas valve with angle design and nut, operating within temperature limits from –20°C to +60°C, with pressure limits up to MOP5.
View Product →
R730GA Ball valve, female-female connections,
R730GA Ball valve, female-female connections,
Giacomini S.p.A.
EN331:2015 approved
View Product →
k.60
k.60
Bonomi Industries
HIGH TEMPERATURE RESISTANCE Now approved for HTB use (Hochtemperaturbeständigkeit) Class B 0,1 (0,1 bar @650°C for at least 30 minutes).
View Product →
s.84 EN331
s.84 EN331
Bonomi Industries
1/4" - 4" EN 10226-1 Firefighting red handle
View Product →

+ 18 more products available

Related Standards AnalysisStandards adopted by manufacturers using: ISO 4427-1975420 9ISO 4427-15EN 12201-14EN 1555-13DIN 80753DIN 80742SII 714522ISO 4427-22EN 1401-12SII 884-12ASTM D1785#4
ISO 4427-1
Plastics piping systems for water supply and for d...
Purchase Standard

Top Manufacturers Using This Standard

A.A.H. Plast Ltd.
A.A.H. Plast Ltd.
Israel
Plassim
Plassim
Palad H.Y. Industries
Palad H.Y. Industries
Israel
Idrotherm 2000
Idrotherm 2000
Italy
Specialized Co. for Plastic Industries (S&M)
Specialized Co. for Plastic Industries (S&M)
Jordan
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
Thailand
Thai Vinytech (2002) Co., Ltd.
Thai Vinytech (2002) Co., Ltd.
Thailand
Nupi Industrie Italiane S.p.A.
Nupi Industrie Italiane S.p.A.
P.E.S Polyethylene Pipes and Fittings Manufacturing Co.
P.E.S Polyethylene Pipes and Fittings Manufacturing Co.

Example Products Using ISO 4427-1

HDPE Pipes for Wastewater
HDPE Pipes for Wastewater
A.A.H. Plast Ltd.
View Product →
Meriflex Pipes
Meriflex Pipes
Plassim
View Product →
PE-100+
PE-100+
Palad H.Y. Industries
View Product →
RENOVATION VRC +
RENOVATION VRC +
Idrotherm 2000
Polyethylene pipes PE100 RC RENOVATION VRC+ (multilayer pipes)
View Product →
RENOVATION VRC & RENOVATION VRC Blue
RENOVATION VRC & RENOVATION VRC Blue
Idrotherm 2000
View Product →
HDPE Pipes
HDPE Pipes
Specialized Co. for Plastic Industries (S&M)
HDPE Pipes from S&M are manufactured according to ISO, DIN and BS standards from 20mm up to 800mm outside diameter in various Nominal Pressure Classes, Standards Dimensions Ratio and Pipe Series, details of which are shown later in our catalog. S&M HDPE pipes up to DN 125 are produced in 100 meters coil standard length. However, HDPE pipes DN 140 – DN 630 is produced in 12 Meters standards lengths (other lengths are available upon request).
View Product →
HDPE PIPES
HDPE PIPES
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
View Product →
hdpe pipes
hdpe pipes
Thai Vinytech (2002) Co., Ltd.
View Product →

+ 2 more products available

Related Standards AnalysisStandards adopted by manufacturers using: EN 12201-1865320 8EN 12201-15ISO 4427-14EN 1401-13EN 1452-13EN 1555-12EN 50086-12DIN 80752ISO 4437-12ISO 154942DIN 8061#5
EN 12201-1
Plastics piping systems for water supply, and for ...

Top Manufacturers Using This Standard

Costa & Bumba
Costa & Bumba
Plassim
Plassim
Idrotherm 2000
Idrotherm 2000
Italy
Lareter Spa
Lareter Spa
Italy
Specialized Co. for Plastic Industries (S&M)
Specialized Co. for Plastic Industries (S&M)
Jordan
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
Thailand
SIMONA Peak Pipe Systems
SIMONA Peak Pipe Systems
United Kingdom
Nupi Industrie Italiane S.p.A.
Nupi Industrie Italiane S.p.A.

Example Products Using EN 12201-1

CBPRESSAN
CBPRESSAN
Costa & Bumba
This pipe is intended for municipal water and sewage networks and can be used in: Gravity drinking and wastewater pipelines with or without pressure Municipal sewage collectors Rainwater collectors GENERAL CHARACTERISTICS The pipes are straight and have smooth internal and external surfaces. They are free of pores, bubbles, stains, cracks, or other defects. PVC pipes for pressure sewage are gray or tile-colored.
Meriflex Pipes
Meriflex Pipes
Plassim
View Product →
RENOVATION VRC +
RENOVATION VRC +
Idrotherm 2000
Polyethylene pipes PE100 RC RENOVATION VRC+ (multilayer pipes)
View Product →
RENOVATION VRC & RENOVATION VRC Blue
RENOVATION VRC & RENOVATION VRC Blue
Idrotherm 2000
View Product →
RENO 100 WASTE
RENO 100 WASTE
Idrotherm 2000
Polyethylene pipes PE100 RENO PRESSURE PIPES
View Product →
PE Fittings
PE Fittings
Lareter Spa
PE fittings are obtained by thermoforming, butt welding and hard-facing for aqueducts, waste water discharges and biogas systems.
View Product →
HDPE Pipes
HDPE Pipes
Specialized Co. for Plastic Industries (S&M)
HDPE Pipes from S&M are manufactured according to ISO, DIN and BS standards from 20mm up to 800mm outside diameter in various Nominal Pressure Classes, Standards Dimensions Ratio and Pipe Series, details of which are shown later in our catalog. S&M HDPE pipes up to DN 125 are produced in 100 meters coil standard length. However, HDPE pipes DN 140 – DN 630 is produced in 12 Meters standards lengths (other lengths are available upon request).
View Product →
HDPE PIPES
HDPE PIPES
THAI-ASIA P.E. PIPE CO., LTD. (TAP)
View Product →

+ 2 more products available

Related Standards AnalysisStandards adopted by manufacturers using: AWWA C906865320 8AWWA C9066ASTM F7145ASTM D30355ASTM D33504AWWA C9014ASTM D25133FM 16132ANSI/ASTM F7...2CSA B137.42ASTM D1785#6
AWWA C906
POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN...
Purchase Standard

Top Manufacturers Using This Standard

Infra Pipe Solutions (IPS)
Infra Pipe Solutions (IPS)
Specialized Co. for Plastic Industries (S&M)
Specialized Co. for Plastic Industries (S&M)
Jordan
Flying W Plastics, Inc.
Flying W Plastics, Inc.
United States
Improved Piping Products, Inc.
Improved Piping Products, Inc.
United States
WL Plastics
WL Plastics
United States
Centennial Plastics, Inc.
Centennial Plastics, Inc.
United States
Plásticos Técnicos Mexicanos, S.A. de C.V.
Plásticos Técnicos Mexicanos, S.A. de C.V.
Mexico
Teel Plastics, Inc.
Teel Plastics, Inc.
United States

Example Products Using AWWA C906

Sclairpipe
Sclairpipe
Infra Pipe Solutions (IPS)
View Product →
HDPE Pipes
HDPE Pipes
Specialized Co. for Plastic Industries (S&M)
HDPE Pipes from S&M are manufactured according to ISO, DIN and BS standards from 20mm up to 800mm outside diameter in various Nominal Pressure Classes, Standards Dimensions Ratio and Pipe Series, details of which are shown later in our catalog. S&M HDPE pipes up to DN 125 are produced in 100 meters coil standard length. However, HDPE pipes DN 140 – DN 630 is produced in 12 Meters standards lengths (other lengths are available upon request).
View Product →
FWP Municipal & Industrial  HDPE Pipe
FWP Municipal & Industrial HDPE Pipe
Flying W Plastics, Inc.
View Product →
High Density Polyethylene Flange Adapters IPS - 2
High Density Polyethylene Flange Adapters IPS - 2" to 63"
Improved Piping Products, Inc.
View Product →
WL116
WL116
WL Plastics
Multi-application use
View Product →
WL116
WL116
WL Plastics
Multi-application use
View Product →
WL130 PE4710
WL130 PE4710
WL Plastics
View Product →
CenFuse HDPE 4710
CenFuse HDPE 4710
Centennial Plastics, Inc.
Fusible, NSF 14 certified Iron Pipe Size polyethylene pipe suitable for geothermal, golf irrigation, mining, industrial, oil and gas, and stock water applications requiring controlled outside diameter pipe. Comes with a 50-year warranty.
View Product →

+ 3 more products available

Related Standards AnalysisStandards adopted by manufacturers using: ASTM D3350865320 8ASTM D33506ASTM F7145AWWA C9015ASTM D25135AWWA C9065ASTM D30354ASTM D22393FM 16133ASTM F2306/F...3AASHTO M252#7
ASTM D3350
Standard Specification for Polyethylene Plastics P...
Purchase Standard

Top Manufacturers Using This Standard

Endot Industries, Inc.
Endot Industries, Inc.
United States
Flying W Plastics, Inc.
Flying W Plastics, Inc.
United States
WL Plastics
WL Plastics
United States
Century Products USA
Century Products USA
United States
Centennial Plastics, Inc.
Centennial Plastics, Inc.
United States
Plásticos Técnicos Mexicanos, S.A. de C.V.
Plásticos Técnicos Mexicanos, S.A. de C.V.
Mexico
Teel Plastics, Inc.
Teel Plastics, Inc.
United States
JM Eagle
JM Eagle

Example Products Using ASTM D3350

Endopure
Endopure
Endot Industries, Inc.
ENDOT EndoPure: On the outside, it's blue, color coded to support the industry color coding standards. On the inside it's completely natural; only the purest polyethylene, making it; Lead Free, Chlorine Free and Solvent Free. EndoPure comes ENDOT sealed with our special crimping process to ensure that it remains contaminate free, Guaranteed. For your next project, make it ENDOT EndoPure...and make it as perfect as possible. ENDOT Industries backs EndoPure with a certificate of purity in addition to a Lifetime Warranty, including the most liberal cost of replacement provisions. (See Warranty for Details)
View Product →
Endot PE2708/2406 Yellow MDPE Gas Pipe (IPS & CTS)
Endot PE2708/2406 Yellow MDPE Gas Pipe (IPS & CTS)
Endot Industries, Inc.
Endot yellow polyethylene gas pressure pipe and tubing is manufactured and tested to meet or exceed the national standards for gas pressure pipe and pipelines as published by The American Society for Testing & Materials and the Federal Government, including standards ASTM D-3350, ASTM D-2513, and The Mininum Federal Standards for Gas Pipelines. Endot's yellow gas pressure pipe is manufactured using Bi-modal MDPE (medium density polyethylene) which exceeds industry standards, and provides excellent environmental streess crack resistance and outstanding long term performance. All Endot Yellow Gas Pipe is produced using DOW Chemical DGDA 2420, Bi-Modal, MDPE resin. Bi-Modal resin provides a significantly higher level of stress crack resistance and RCP performance than standard mono-modal materials. Endot Yellow Gas Pipe is UV Stabilized for outdoor storage prior to installation with a minimum of 3 years UV stability. Endot Yellow Gas Pipe is Certified by NSF to meet the requirements of the Uniform Plumbing Code. Endot Yellow Gas Pipe is specifically designed for natural gas and liquid propane distribution.
View Product →
FWP Municipal & Industrial  HDPE Pipe
FWP Municipal & Industrial HDPE Pipe
Flying W Plastics, Inc.
View Product →
WL130 PE4710
WL130 PE4710
WL Plastics
View Product →
HDPE Pipe and Accessories
HDPE Pipe and Accessories
Century Products USA
High-density polyethylene piping and accessories designed for durability and resistance to corrosion, suitable for various agricultural applications.
View Product →
CenDuct HDPE Conduit
CenDuct HDPE Conduit
Centennial Plastics, Inc.
HDPE conduit made specifically for telecom, power, and cable markets, offering superior corrosion resistance and tensile strength, available in ¾” – 6” diameters.
View Product →
PT CORR Sewer and Storm drain Ø 4” to 60”
PT CORR Sewer and Storm drain Ø 4” to 60”
Plásticos Técnicos Mexicanos, S.A. de C.V.
View Product →
Water Pipe
Water Pipe
Teel Plastics, Inc.
View Product →

+ 2 more products available

Related Standards AnalysisStandards adopted by manufacturers using: PED 2014/68/EU865320 8PED 2014/68/...3API 6073EN 3312API 6D2ASME B16.342ISO 172922ANSI ASME B1...2API 6FA2ISO 104972SII 21003-1#8
PED 2014/68/EU
Pressure Equipment Directive...

Top Manufacturers Using This Standard

GWC International
GWC International
Italy
Giacomini S.p.A.
Giacomini S.p.A.
Italy
Bonomi Industries
Bonomi Industries
Italy
Alfa Valvole
Alfa Valvole
Italy
Gpi Tanks
Gpi Tanks
Netherlands
IVR S.p.A.
IVR S.p.A.
Nupi Industrie Italiane S.p.A.
Nupi Industrie Italiane S.p.A.
Dresser Utility Solutions
Dresser Utility Solutions
USA

Example Products Using PED 2014/68/EU

Trunnion Mounted Side Entry Twin Ball Valve
Trunnion Mounted Side Entry Twin Ball Valve
GWC International
Side-Entry (split-body) three pieces standard bolted body or compact design construction, Trunnion-supported, Floating seats spring energized, Full or Reduced Bore, Bi-Directional. Different Type of Bleed Connection is available: plugged, complete with blind flange or with needle / floating / trunnion valve.
View Product →
Floating Ball Valve
Floating Ball Valve
GWC International
Side-Entry (split-body) two or three pieces bolted construction, Seat-supported ball, renewable seats, Full or Reduced Bore, Bi-Directional.
View Product →
R950W DADO ball valve, female-female connections, heavy series
R950W DADO ball valve, female-female connections, heavy series
Giacomini S.p.A.
View Product →
s.110
s.110
Bonomi Industries
3/8" - 4" ISO 228 gate valve
View Product →
s.30 DZR
s.30 DZR
Bonomi Industries
12 - 54 mm compression ends, for insulation, dezincification-resistant
View Product →
A60 ANSI 300
A60 ANSI 300
Alfa Valvole
A flanged-type split body ball valve with a full bore, suitable for a wide range of applications. Available in sizes from 1/2” to 6” and pressure ratings up to ANSI 300.
View Product →
ALFA K20T 1000 PSI PN63
ALFA K20T 1000 PSI PN63
Alfa Valvole
A two-piece screwed type ball valve with a compact and robust design, available in sizes from DN 6 to DN 50 and pressure ratings up to 1000 PSI.
View Product →
ALFA 30 PN10-40 / ANSI 150
ALFA 30 PN10-40 / ANSI 150
Alfa Valvole
A three-way wafer body ball valve suitable for flow diverting or mixing applications, available in sizes from DN 15 to DN 250 and pressure ratings up to ANSI 300.
View Product →

+ 8 more products available

Related Standards AnalysisStandards adopted by manufacturers using: ICC 901/SRCC 100865320 8ICC 901/SRCC...2EN 12975-11ISO 98061EN 12976-11ISO 9459-11EN 128971DIN 4753-3#9
ICC 901/SRCC 100
Solar Thermal Collector Standard...
Purchase Standard

Top Manufacturers Using This Standard

Chromagen
Chromagen
Israel
Magen eco-Energy
Magen eco-Energy
Israel
8th Fire Solar
8th Fire Solar
United States
Hydro Solar Innovative Energy
Hydro Solar Innovative Energy
Canada
Absolicon Solar Collector AB
Absolicon Solar Collector AB
Sweden
Acevedo Solar Systems
Acevedo Solar Systems
Puerto Rico
Dimas SA
Dimas SA
Greece
Solimpeks Solar Corp.
TURKEY

Example Products Using ICC 901/SRCC 100

Collectors
Collectors
Chromagen
View Product →
Thermosiphon solar
Thermosiphon solar
Chromagen
View Product →
Heliocol Solar Pool Heating System
Heliocol Solar Pool Heating System
Magen eco-Energy
A solar pool heating system designed to efficiently heat swimming pools using solar energy, reducing energy costs and environmental impact.
View Product →
Sunstar Solar Pool Heating System
Sunstar Solar Pool Heating System
Magen eco-Energy
An advanced solar pool heating solution that utilizes cutting-edge technology to provide optimal heating performance for pools of various sizes.
View Product →
SunValue Solar Pool Heating System
SunValue Solar Pool Heating System
Magen eco-Energy
A cost-effective solar pool heating system offering reliable performance and easy installation for residential pools.
View Product →
SPF 40
SPF 40
8th Fire Solar
A 10-foot solar thermal panel tailored for commercial applications, offering robust heat collection and supply for larger spaces like workshops and businesses.
View Product →
SPF 26
SPF 26
8th Fire Solar
A 6-foot solar thermal panel ideal for smaller installations, providing clean and sustainable heat for cabins, garages, or tiny homes.
View Product →
Vacuum Tube Solar Collector Kit, SRCC Certified, VT58 SERIES - Complete with Manifold, Frame, Tubes and 45⁰ Frame Kit
Vacuum Tube Solar Collector Kit, SRCC Certified, VT58 SERIES - Complete with Manifold, Frame, Tubes and 45⁰ Frame Kit
Hydro Solar Innovative Energy
View Product →

+ 5 more products available

Related Standards AnalysisStandards adopted by manufacturers using: AASHTO M252865320 8AASHTO M2528AASHTO M2946ASTM F2306/F...4ASTM F667/F6...3AASHTO M3303ASTM F2648/F...3ASTM D33503ASTM F810-122ANSI/ASTM D3...2ANSI/ASTM F4...#10
AASHTO M252
Standard Specification for Corrugated Polyethylene Drainage Pipe
Purchase Standard

Top Manufacturers Using This Standard

Fratco
Fratco
United States
Century Products USA
Century Products USA
United States
Haviland Drainage Products Co.
Haviland Drainage Products Co.
United States
Plásticos Técnicos Mexicanos, S.A. de C.V.
Plásticos Técnicos Mexicanos, S.A. de C.V.
Mexico
Advanced Drainage Systems
Advanced Drainage Systems
United States
JM Eagle
JM Eagle
Wisconsin Tubing, LLC
Wisconsin Tubing, LLC
Advanced Drainage Systems, Inc. (ADS)
Advanced Drainage Systems, Inc. (ADS)
USA

Example Products Using AASHTO M252

SingleCorr
SingleCorr
Fratco
A single-wall HDPE pipe designed for efficient drainage in various applications.
View Product →
SmoothCorr
SmoothCorr
Fratco
A dual-wall HDPE pipe offering enhanced strength and durability for drainage systems.
View Product →
HDPE Pipe and Accessories
HDPE Pipe and Accessories
Century Products USA
High-density polyethylene piping and accessories designed for durability and resistance to corrosion, suitable for various agricultural applications.
View Product →
SmoothPRO HP
SmoothPRO HP
Haviland Drainage Products Co.
High-performance corrugated polypropylene pipe with a smooth interior, offering increased stiffness and superior joint performance.
View Product →
Smooth Flow Pipe
Smooth Flow Pipe
Haviland Drainage Products Co.
Corrugated polyethylene pipe with a smooth interior, ideal for storm sewers and culverts where high strength and maximum flow are essential.
View Product →
PT CORR Sewer and Storm drain Ø 4” to 60”
PT CORR Sewer and Storm drain Ø 4” to 60”
Plásticos Técnicos Mexicanos, S.A. de C.V.
View Product →
N-12® Dual Wall Pipe
N-12® Dual Wall Pipe
Advanced Drainage Systems
A durable, high-performance pipe designed for stormwater management applications.
View Product →
Eagle Corr PE (Dual Wall)
Eagle Corr PE (Dual Wall)
JM Eagle
JM Eagle’s Eagle Corr PE Dual Wall pipe is suitable for use in gravity flow drainage in DOT/capitol improvement, residential, commercial, recreational, agricultural and irrigation applications.
View Product →

+ 4 more products available