What's New? (Old)

Steel Wire Rope Ropetex PERFORM 6C

Rope construction: 6x36-IWRC, Compacted outer strands Marking: According to standard Standard: EN 12385-4

Related Standards:

Steel wire rope veropro 8

Wire rope construction: veropro 8 is a 8-strand, non rotation-resistant rope with compacted outer strands and a rope core covered with a plastic layer. Features: Very high breaking strength. Very stabile rope construction with very good fatigue properties. A plastic layer between inner and outer strands prevents inner wear and protects the core from corrosion. Very high resistance against flattening and wear. Specially suitable for multilayer spooling (Lang Lay). ISO 4309 Rope Category No: Up to 42mm RCN.09, 43-48mm RCN.11, > 48mm RCN.13 Marking: According to standard Standard: EN 12385-4 Warning: veropro 8 may not be used with a swivel. Fill factor: 0.666 RCN: 09 Tolerance Ø: +2% to +4%

CW SOLO | Industrial Cable Gland

For all types of Steel & Aluminium Wire Armoured Cables Industrial Single Seal Cable Gland SOLO LSF Kit • Metal-to-metal armour clamping • Direct & remote installation • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • -60°C to +130°C • Deluge protection option • EMC tested • LUL (London Underground) approved

Related Standards:

E1U | Industrial Cable Gland

Double Seal Industrial Cable Gland • Metal-to-metal armour clamping • Direct & remote installation • Permanently crimped, low impedance earth termination • Secure against self-loosening • Displacement type inner seal • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • Designed to prevent Coldflow • Deluge protection option • -60°C to +130°C • EMC tested

Related Standards:

BUNDLES

Ritchie has been designing and supplying gas cylinder bundle frames to multinational industries since 1980 providing TPED and ISO BS EN 13769 certifications as appropriate. All testing of this equipment can be carried out by a third party on site in Forfar up to and including 64 cylinder frames. Bundles are provided with appropriate TPED and ISO BS EN 13769 certifications. Supplied to both European and International markets.

OFFSHORE CONTAINERS

Ritchie have been manufacturing offshore shipping containers for end users and hire companies for more than 20 years. A wide range of in house and bespoke designs of mini, half, three-quarter and full height designs for a variety of requirements is available. Full traceability and certification to DNVGL-ST-E271 and BS EN ISO 10855 is available together with a bespoke design and testing service for unique needs. Containers can be supplied with cargo nets or tarpaulins, anti-slip flooring and multiple tie- down points for securing cargo. Standard containers are 10’x8’ but are also available in 8’, 12’, 15’and 20’ lengths.

Related Standards:

16 CYLINDER OFFSHORE GAS BUNDLE

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

64 CYLINDER MEGC OFFSHORE UNIT

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

16/6 CYLINDER OFFSHORE BASKET

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

L101H LED Beacon

The L101H is a compact, high output LED beacon ideal for all signalling applications including fire, status indication, security and process control. UL, cUL and ULC approved.

Related Standards:

B400RTH Rotating Beacon [Halogen Bulb]

The B400RTH rotating beacon features a 35/40W Halogen lamp providing 1,204 Candelas of light output. The parabolic reflecting mirror creates a focused beam of light maximising the visual effectiveness.

A100 Alarm Horn Sounder

The A100 is a compact, high output, 110dB(A) alarm sounder. CPR complaint, EN54-3 tested and UL/cUL and ULC approved. Featuring 64 alarm tone frequencies and 4 remotely activated stages/channels.

Related Standards:

A112N Alarm Horn Sounder

The A112N is a high output 120dB(A) automatically synchronised alarm horn sounder. Globally approved for fire, marine and general signalling applications. Featuring 64 alarm tones and 4 remotely activated stages.

Related Standards:

Large radius ESP sheaves

Related Standards:

Freezstop Micro (FSM)

Freezstop Micro is an industrial grade, self-regulating heating tape that can be used for freeze protection or temperature maintenance of pipework and vessels. It is particularly suited to small diameter pipes and instrument tubing such as impulse or analyser lines. It can be cut-to-length on site to match exact piping lengths without any complicated design considerations. Freezstop Micro is approved for use in non-hazardous and hazardous areas to worldwide standards. Its self-regulating characteristics improve safety and reliability. Freezstop Micro will not overheat or burnout, even when overlapped upon itself. Its power output self-regulates in response to the pipe temperature.

Related Standards:

FailSafe Ultimo (FSU / FSUw)

FailSafe Ultimo is an industrial grade self-regulating heating cable that can be used for freeze protection or temperature maintenance of pipework and vessels. It can be cut-to-length on site to match exact piping lengths without any complicated design considerations. FailSafe Ultimo is approved for use in non-hazardous, and hazardous areas to worldwide standards. Its self-regulating characteristics improve safety and reliability. FailSafe Ultimo will not overheat or burnout, even when overlapped upon itself. Its power output self-regulates in response to the pipe temperature.

Related Standards:

SnoMelt (SM)

SnoMelt cables are industrial/commercial grade self-regulating heating cables that can be used for snow melting and ice prevention of surfaces such as concrete roads, ramps and paths. It may also be used on stairways, walkway gratings and loading docks. It can be cut-to-length on site to match exact lengths without any complicated design considerations. SnoMelt will not overheat or burnout, even when overlapped upon itself, although this is not recommended. Its power output self-regulates in response to the surface temperature. Its self-regulating characteristics reduce energy usage and lowers operating costs.

FailSafe Super (FSS)

FailSafe Super is an industrial grade self-regulating heating cable that can be used for freeze protection or temperature maintenance of pipework and vessels up to 225°C. It can be cut-to-length on site to match exact piping lengths without any complicated design considerations. FailSafe Super is approved for use in non-hazardous, and hazardous areas to worldwide standards. Its self-regulating characteristics improve safety and reliability. FailSafe Super will not overheat or burnout, even when overlapped upon itself. Its power output self-regulates in response to the pipe temperature.

Related Standards:

D171 1IR+UV-SS Multi Spectrum Flame Detector

STANDARD FEATURES • Multi-Spectrum 1IR + UV design • Detects Hydrocarbon and Non-Hydrocarbon fires with the highest false alarm immunity • Standard outputs: Warning / Alarm / Fault / Auxiliary relays, 0-20mA and RS485 • 200 event history log & 6 FireGraphs® • Adjustable Time/Verification Delay up to 20 seconds • Automatic Self-Test checking electronic circuitry and Optical Path Integrity test with OptiRadar® • Standard 316 Stainless Steel enclosure • Test Mode for manual testing • Solar Blind • Heater Option to avoid condensation and icing • High False Alarm immunity to external non-fire sources • Manufactured in the USA with a 5-year warranty • RFI & EMC compliant • Meets SIL 2 requirements • NEMA 4 & 4X (IP66,67) and explosion-proof Stainless- Steel enclosure • FM/CFM/CSFM Approved

Related Standards:

SPC-24 - Beam Detector

The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated. STANDARD FEATURES • Microprocessor based for reliability • Simple setup and alignment with signal strength LEDs • Provides 60 feet on center linear protection at a range of 32.8 feet to 328 feet • Automatic compensation for signal drift or dirty lens • Three field adjustable sensitivity settings • Form A alarm and Form B trouble contacts • Calibrated filters available to verify sensitivity (purchased separately) • Color-coded emitter (red) and receiver (green) labels for easy recognition • Adjustable to one of the three obscuration settings of 25%, 50% or 70% per span • Voltage and RF transient protection • External red LED when alarm condition is indicated

HCA-4D 4 Zone Conventional Panel with DACT, 6.5 AMP, 120VAC, Red

• UL864 9th Edition / NFPA Compliant • Fully programmable using simple menu options • Built-in two-line (16 Characters for each line) LCD display provides easy to read information • 15 Key control buttons for easy programming, reset and silencing. • Real time clock • Event History log (256 events) with Date/Time stamp, which can be viewed from LCD display • Compatible with wide range of detection devices • 4 Programmable Supervised NAC outputs • Switchable 120/240VAC 50/60 Hz Power supply • 5 Programmable output patterns for NAC circuits • Gentex Sync Protocol Built-in • Built-in Dialer for HCA-2D, HCA-4D and HCA-8D Only • Supports Releasing of Agents & Water on HCA-4 & HCA-8 models • Three programmable general purpose relays • Dedicated alarm and trouble relays • Built-in walk test feature • Supports up to two 12V, 18Ah Backup batteries • Supports one Remote Annunciator via RS-485

Related Standards:

HCA-4 - 4 Zone Conventional Panel, 6.5 AMP, 120V, Red

The HCA series is available in a 2, 4, or 8 zone conventional panel design which is in accordance with UL 864 9th Edition Listing Detection and Fire Alarm Systems – Control and Indicating Equipment. STANDARD FEATURES • UL864 9th Edition / NFPA Compliant • Fully programmable using simple menu options • Built-in two-line (16 Characters for each line) LCD display provides easy to read information • 15 Key control buttons for easy programming, reset and silencing. • Real time clock • Event History log (256 events) with Date/Time stamp, which can be viewed from LCD display • Compatible with wide range of detection devices • 4 Programmable Supervised NAC outputs • Switchable 120/240VAC 50/60 Hz Power supply • 5 Programmable output patterns for NAC circuits • Gentex Sync Protocol Built-in • Built-in Dialer for HCA-2D, HCA-4D and HCA-8D Only • Supports Releasing of Agents & Water on HCA-4 & HCA-8 models • Three programmable general purpose relays • Dedicated alarm and trouble relays • Built-in walk test feature • Supports up to two 12V, 18Ah Backup batteries • Supports one Remote Annunciator via RS-485

Related Standards:

ALO-V Multi-Criteria Smoke Detector and Duct Detector Head

The ALO-V (UL 268 7th edition listed) is a reliable, high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. This detector is also suitable for monitoring smoke in HVAC ducts. The newly developed “multi-spectrum smoke categorization technology” detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms. *NOTE-7th Edition Bases required The ASB7, ASBL7, SCI-B47, SCI-B67, YBN-NSA-47, and HSB-NSA-67 bases are compatible with the ALO-V. STANDARD FEATURES UL 268 7th Edition Listed Designed to resist unwanted alarms from cooking and other nuisance alarm sources Optical particulate identification Early fire smoke detection 360° view of detector status LED Programmable non-polling LED Vandal resistant security locking feature FLAT RESPONSE™ technology responds consistently to fire of all types, ensuring reliable detection of any fire emergency

Related Standards:

HHLFR - Low Frequency Horn, 24VDC, Wall Mount, Red

The HHLF is a high quality, low profile, low frequency audible appliance that offers a dependable audible alarm with a low current draw. The HHLF is ideal for any occupancy that requires notification appliances. The HHLF horn offers a 520 Hz square wave, temporal 3 tone. A jumper selection is available for normal or loud decibel tone. A temporal 4 pattern is available when used with the Hochiki HTSM Synchronization Control Module. STANDARD FEATURES • Nominal voltage 24 VDC • Unit Dimensions: 6-1/8” (15.55 cm) high x 5-1/2” (13.97 cm) wide x 1-5/8” (4.13 cm) deep • Synchronize horn with Hochiki HTSM Synchroniza-tion Control Module • Prewire entire system, install mounting bracket, then install signals • Input terminals accept 12 to 18 AWG • Produces a 520Hz square wave, temporal 3 tone Jumper selection for normal or loud dBA • Temporal 4 pattern available when used with Hochiki HTSM Synchronization Module • Temporal 4 520Hz measured per ANSI/UL 2075 • Tamperproof re-entrant style grill and locking screw (optional use) • Faceplate available in red or off-white

HHLFR - Low Frequency Horn, 24VDC, Wall Mount, Red

The HHLF is a high quality, low profile, low frequency audible appliance that offers a dependable audible alarm with a low current draw. The HHLF is ideal for any occupancy that requires notification appliances. The HHLF horn offers a 520 Hz square wave, temporal 3 tone. A jumper selection is available for normal or loud decibel tone. A temporal 4 pattern is available when used with the Hochiki HTSM Synchronization Control Module. STANDARD FEATURES • Nominal voltage 24 VDC • Unit Dimensions: 6-1/8” (15.55 cm) high x 5-1/2” (13.97 cm) wide x 1-5/8” (4.13 cm) deep • Synchronize horn with Hochiki HTSM Synchroniza-tion Control Module • Prewire entire system, install mounting bracket, then install signals • Input terminals accept 12 to 18 AWG • Produces a 520Hz square wave, temporal 3 tone Jumper selection for normal or loud dBA • Temporal 4 pattern available when used with Hochiki HTSM Synchronization Module • Temporal 4 520Hz measured per ANSI/UL 2075 • Tamperproof re-entrant style grill and locking screw (optional use) • Faceplate available in red or off-white

Related Standards:

HHLFR - Low Frequency Horn, 24VDC, Wall Mount, Red

The HHLF is a high quality, low profile, low frequency audible appliance that offers a dependable audible alarm with a low current draw. The HHLF is ideal for any occupancy that requires notification appliances. The HHLF horn offers a 520 Hz square wave, temporal 3 tone. A jumper selection is available for normal or loud decibel tone. A temporal 4 pattern is available when used with the Hochiki HTSM Synchronization Control Module. STANDARD FEATURES • Nominal voltage 24 VDC • Unit Dimensions: 6-1/8” (15.55 cm) high x 5-1/2” (13.97 cm) wide x 1-5/8” (4.13 cm) deep • Synchronize horn with Hochiki HTSM Synchroniza-tion Control Module • Prewire entire system, install mounting bracket, then install signals • Input terminals accept 12 to 18 AWG • Produces a 520Hz square wave, temporal 3 tone Jumper selection for normal or loud dBA • Temporal 4 pattern available when used with Hochiki HTSM Synchronization Module • Temporal 4 520Hz measured per ANSI/UL 2075 • Tamperproof re-entrant style grill and locking screw (optional use) • Faceplate available in red or off-white

Related Standards:

HEH24-WR - Horn 24VDC, Wall Mount, Red

The HE Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The HE Series is available in both 12VDC and 24VDC models and is designed for audible notification in fire protective signaling systems. The HE Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The HE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The HE Series is shipped with the standard 4" metal mounting plate which incorporates the popular Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing. The HE Series appliances are UL 464 Listed for use with fire protective systems and are warranted for three years from the date of purchase.

Related Standards:

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.

Related Standards:

Cable tie inside serrated, 305x4.6mm, ⌀1.5-80mm, natural, 100pcs.

Available in a wide range of materials and sizes High tensile strength with very low insertion force Inside serrated cable ties for a strong hold onto bundles Ergonomic bent tail offers quick and simple installation Easy application either manually or with an application tool

Related Standards:

Gangway Type-A 12-24m up to 30 degree

Shallow Angle Lightweight Aluminium Gangway for easy ship-shore access with standard ship hook and jetty roller. Suitable for Angles 0-30 degrees Suitable for lengths 12m to 27m 600mm clear width Design Deck Loading 4kN/M² (Pedestrian access) Aluminium Sections Marine Grade 6082-T6 Aluminium Plates Marine Grade 6082-T6 or 5083-0 for light plates Pins, Axles & Fasteners 316 stainless steel Anti-slip walking surface Lifting & Lashing Lugs Manufactured and Inspected to Tyne Gangway standard code of practice: Company Quality to ISO9001:2015 Factory Production Control to EN1090-1:2009+A1:2011 and is certified by DNV-GL for fabrication Welding to BS EN ISO 15614-2:2005 Lifting Lugs DPI & load tested CE Execution Class 2 This product is accepted for DNV product certification and is accepted for installation on all vessels classed by DNV. DNV have Type Approved that this product is found to comply with: GL Rules for Classification and Construction VI – Additional Rules and Guidelines Part 2 – Loading Gear Chapter 4 – Guidelines for the Construction and Testing of Accesses to Ships DNV GL standard DNVGL-ST-0377 – Standard for shipboard lifting appliances The product is also in line with the requirements of ISO7061 but is not Type Approved to that standard as it is not anodised. This exception will be recorded on the certificate.

Related Standards:

Gangway Type-B 12-24m up to 50 degree

Steep Angle Lightweight Aluminium Gangway for easy ship-shore access with standard ship hook and jetty roller. Suitable for Angles 0-50 degrees Suitable for lengths 12m to 27m 600mm clear width Design Deck Loading 4kN/M² (Pedestrian access) Aluminium Sections Marine Grade 6082-T6 Aluminium Plates Marine Grade 6082-T6 or 5083-0 for light plates Pins, Axles & Fasteners 316 stainless steel Anti-slip walking surface Lifting & Lashing Lugs Manufactured and Inspected to Tyne Gangway standard code of practice: Company Quality to ISO9001:2015 Factory Production Control to EN1090-1:2009+A1:2011 and is certified by DNV-GL for fabrication Welding to BS EN ISO 15614-2:2005 Lifting Lugs DPI & load tested CE Execution Class 2 This product is accepted for DNV product certification and is accepted for installation on all vessels classed by DNV. DNV have Type Approved that this product is found to comply with: GL Rules for Classification and Construction VI – Additional Rules and Guidelines Part 2 – Loading Gear Chapter 4 – Guidelines for the Construction and Testing of Accesses to Ships DNV GL standard DNVGL-ST-0377 – Standard for shipboard lifting appliances The product is also in line with the requirements of ISO7061 but is not Type Approved to that standard as it is not anodised. This exception will be recorded on the certificate.

Related Standards:

hallow Angle Lightweight Aluminium (SHALA)

Shallow Angle Lightweight Aluminium (SHALA) Short range, shallow 0 - 30 degrees working angle, lightweight aluminium gangways for easy ship-shore access with standard ship hook and jetty roller

Reeler

R.B.Ross has been designing and manufacturing Spooling Winches “Reelers” for umbilicals and cables for over 30 years. Our best-in-class reelers are the most compact and lightweight in the industry. Drivetrains are available as Pneumatic, Hydraulic or Electric (or a combination). All of our units are marked UKCA / CE and can be had with DNV-ST-E271 certified frames and ATEX Zone 1 / 2 compliance.

Related Standards:

FDS303 Multi-Spectrum IR Flame Detector

World-Leading IR3 Flame Detection 160m certified range. Sub-second response. Proven performance from the global leader in flame detection. The Micropack FDS303 is an explosion-proof multi-spectrum IR flame detector. The device delivers superior performance, responding to hydrocarbon liquid fuel and gas fires at long distances.

Related Standards:

FDS303 UVIR Ultraviolet- Infrared Flame Detector

Designed for hazardous industries where fast fire detection is critical and nuisance alarms are not an option! The MICROPACK FDS303 UVIR is an explosion proof ultraviolet-infrared flame detector. The device delivers superior performance, responding to hydrocarbon liquid fuel and gas fires at long distances. The FDS303 UVIR has been independently tested to demonstrate it can detect a hydroc arbon fuel pan fire at over 128 feet in less than 5 seconds.

Related Standards:

FDS301 Intelligent Visual Flame Detector

Designed for hazardous industries where fast optical flame detection is critical and nuisance alarms are not an option! The MICROPACK FDS301 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its FM and SIL 2 certified flame detection algorithms and on-board digital signal processing. It is the safest and most advanced flame detector on the market today, and its installation track record in the harshest of locations around the globe has proven the instrument to be extremely robust.

Related Standards:

Triple-C

The Triple-C rivals all existing portable gas detectors with its cutting-edge infrared LEL sensor technology, meaning it ensures more reliability and higher quality than standard catalytic sensors. This advance in technology means no calibration is required. If your company requires calibration, it can be quickly completed using the optional calibration station. Features; Manufactured in the USA Cutting-edge infrared sensor technology No need to charge the unit – 3 years of battery life Requires no maintenance, servicing or sensor replacement MED Approved (MED 0575) MER Approved (MER 0097) Lifetime warranty

CW SOLO | Industrial Cable Gland

For all types of Steel & Aluminium Wire Armoured Cables Industrial Single Seal Cable Gland SOLO LSF Kit • Metal-to-metal armour clamping • Direct & remote installation • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • -60°C to +130°C • Deluge protection option • EMC tested • LUL (London Underground) approved

Related Standards:

E1U | Industrial Cable Gland

Double Seal Industrial Cable Gland • Metal-to-metal armour clamping • Direct & remote installation • Permanently crimped, low impedance earth termination • Secure against self-loosening • Displacement type inner seal • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • Designed to prevent Coldflow • Deluge protection option • -60°C to +130°C • EMC tested

Related Standards:

BUNDLES

Ritchie has been designing and supplying gas cylinder bundle frames to multinational industries since 1980 providing TPED and ISO BS EN 13769 certifications as appropriate. All testing of this equipment can be carried out by a third party on site in Forfar up to and including 64 cylinder frames. Bundles are provided with appropriate TPED and ISO BS EN 13769 certifications. Supplied to both European and International markets.

OFFSHORE CONTAINERS

Ritchie have been manufacturing offshore shipping containers for end users and hire companies for more than 20 years. A wide range of in house and bespoke designs of mini, half, three-quarter and full height designs for a variety of requirements is available. Full traceability and certification to DNVGL-ST-E271 and BS EN ISO 10855 is available together with a bespoke design and testing service for unique needs. Containers can be supplied with cargo nets or tarpaulins, anti-slip flooring and multiple tie- down points for securing cargo. Standard containers are 10’x8’ but are also available in 8’, 12’, 15’and 20’ lengths.

Related Standards:

16 CYLINDER OFFSHORE GAS BUNDLE

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

64 CYLINDER MEGC OFFSHORE UNIT

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

16/6 CYLINDER OFFSHORE BASKET

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

L101H LED Beacon

The L101H is a compact, high output LED beacon ideal for all signalling applications including fire, status indication, security and process control. UL, cUL and ULC approved.

Related Standards:

A100 Alarm Horn Sounder

The A100 is a compact, high output, 110dB(A) alarm sounder. CPR complaint, EN54-3 tested and UL/cUL and ULC approved. Featuring 64 alarm tone frequencies and 4 remotely activated stages/channels.

Related Standards:

A112N Alarm Horn Sounder

The A112N is a high output 120dB(A) automatically synchronised alarm horn sounder. Globally approved for fire, marine and general signalling applications. Featuring 64 alarm tones and 4 remotely activated stages.

Related Standards:

Steel Wire Rope Ropetex PERFORM 6C

Rope construction: 6x36-IWRC, Compacted outer strands Marking: According to standard Standard: EN 12385-4

Related Standards:

Steel wire rope veropro 8

Wire rope construction: veropro 8 is a 8-strand, non rotation-resistant rope with compacted outer strands and a rope core covered with a plastic layer. Features: Very high breaking strength. Very stabile rope construction with very good fatigue properties. A plastic layer between inner and outer strands prevents inner wear and protects the core from corrosion. Very high resistance against flattening and wear. Specially suitable for multilayer spooling (Lang Lay). ISO 4309 Rope Category No: Up to 42mm RCN.09, 43-48mm RCN.11, > 48mm RCN.13 Marking: According to standard Standard: EN 12385-4 Warning: veropro 8 may not be used with a swivel. Fill factor: 0.666 RCN: 09 Tolerance Ø: +2% to +4%

CW SOLO | Industrial Cable Gland

For all types of Steel & Aluminium Wire Armoured Cables Industrial Single Seal Cable Gland SOLO LSF Kit • Metal-to-metal armour clamping • Direct & remote installation • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • -60°C to +130°C • Deluge protection option • EMC tested • LUL (London Underground) approved

Related Standards:

E1U | Industrial Cable Gland

Double Seal Industrial Cable Gland • Metal-to-metal armour clamping • Direct & remote installation • Permanently crimped, low impedance earth termination • Secure against self-loosening • Displacement type inner seal • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • Designed to prevent Coldflow • Deluge protection option • -60°C to +130°C • EMC tested

Related Standards:

BUNDLES

Ritchie has been designing and supplying gas cylinder bundle frames to multinational industries since 1980 providing TPED and ISO BS EN 13769 certifications as appropriate. All testing of this equipment can be carried out by a third party on site in Forfar up to and including 64 cylinder frames. Bundles are provided with appropriate TPED and ISO BS EN 13769 certifications. Supplied to both European and International markets.

OFFSHORE CONTAINERS

Ritchie have been manufacturing offshore shipping containers for end users and hire companies for more than 20 years. A wide range of in house and bespoke designs of mini, half, three-quarter and full height designs for a variety of requirements is available. Full traceability and certification to DNVGL-ST-E271 and BS EN ISO 10855 is available together with a bespoke design and testing service for unique needs. Containers can be supplied with cargo nets or tarpaulins, anti-slip flooring and multiple tie- down points for securing cargo. Standard containers are 10’x8’ but are also available in 8’, 12’, 15’and 20’ lengths.

Related Standards:

16 CYLINDER OFFSHORE GAS BUNDLE

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

64 CYLINDER MEGC OFFSHORE UNIT

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

16/6 CYLINDER OFFSHORE BASKET

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requirements. With all these designs we can supply manifolds, source cylinders and test them to your requirements.

Related Standards:

L101H LED Beacon

The L101H is a compact, high output LED beacon ideal for all signalling applications including fire, status indication, security and process control. UL, cUL and ULC approved.

Related Standards:

B400RTH Rotating Beacon [Halogen Bulb]

The B400RTH rotating beacon features a 35/40W Halogen lamp providing 1,204 Candelas of light output. The parabolic reflecting mirror creates a focused beam of light maximising the visual effectiveness.

A100 Alarm Horn Sounder

The A100 is a compact, high output, 110dB(A) alarm sounder. CPR complaint, EN54-3 tested and UL/cUL and ULC approved. Featuring 64 alarm tone frequencies and 4 remotely activated stages/channels.

Related Standards:

A112N Alarm Horn Sounder

The A112N is a high output 120dB(A) automatically synchronised alarm horn sounder. Globally approved for fire, marine and general signalling applications. Featuring 64 alarm tones and 4 remotely activated stages.

Related Standards:

SO5 PMS / LTM FORGED SOCKET

Sockets attached to steel wire rope, used for lifting, anchoring system, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc. Sockets are the strongest steel wire rope end fitting available, and if they are assembled in the proper way they can meet at least the breaking strength of the steel wire rope. Spelter sockets open, closed and wedge, SO1, SO2 and SO3 are used for lifting, rigging, towing and constructions. CR and CRD sockets, SO4 and SO6 are used in anchor lines for temporary and long term mooring between the chain and wire rope. Instructions for use Standard pins are normally used in non permanent and pick and place applications. Safety pins are used for more permanent applications or where the load may slide on the pin causing rotation of the pin. Resin: Before use please read carefully the instructions of the resin manufacturer. In case of incorrect use of the resin, our spelter material can result in an unsafe termination. More information can also be obtained from your wire rope supplier. Always clear the wire rope broom and socket basket from dirt and grease. Make certain that the broomed wires are evenly spaced in the basket, and that the wire and basket are aligned with one another.

Sperryn G940

The G940 is a low-pressure, compact, domestic meter regulator specifically designed for use with 1st, 2nd and 3rd family gasses. Ideally suited for use on metering installations, incorporating G2.5, G4 (U6) and E6 size meters and can be supplied as part of a metering solutions package. The G941 can be equipped with an Under Pressure Shut Off feature (UPSO).

Related Standards:

Sperryn G1000

The wider G1000 family of products are a low pressure, compact regulator for large commercial and industrial applications with excellent capacity capabilities. The G1000 links accurate pressure control, reliability, high efficiency and sensitivity with maximum flow and minimum pressure loss and is designed for use with 1st, 2nd and 3rd family gases. The regulators can be used on metering installations, commercial / industrial installations or OEM applications on burner or boiler trains.

Related Standards:

XP95 Heat Detector (A2S)

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C. Reliable fire detection in areas with a wide temperature range from -20°C to +70°C Ideal for environments that are dirty or smoky under normal circumstances Unaffected by wind and atmospheric pressure

Related Standards:

XP95 Multi-Sensor Detector (Optical/Heat)

The XP95 Multi-Sensor Detector combines independent optical smoke and temperature sensors for better fire detection in areas with deceptive phenomena.

Related Standards:

REACH Heat Detector

The RW1000-400APO is a wireless analogue addressable heat detector that can be configured as either rate-of-rise (A1R) or high temperature (BS) classification as specified in the EN 54-5. Multiple EN 54-5 classes (A1R and BS) can be chosen from configuration software or the keyboard/LCD interface during the link phase. Twin alarm, bi-colour LEDs for 360° visibility Programmable for rate-of-rise (A1R) or static temperature (BS) Bi-directional wireless communication Dual channel redundancy Ten year battery life Five year product warranty

Related Standards:

REACH Open-Area Sounder – Red Body

The RW1500-120APO is a wireless addressable interface and conventional open-area wall sounder that can be used as a stand-alone notification device. Compatible only with REACH Wireless 16 tone pairs Four Volume Settings Bi-directional wireless communication Dual channel redundancy Five year battery life Five year product warranty

Series 65 Heat Detector (A1R)

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty, smoky or steamy under natural conditions Flashing LED versions available

Related Standards:

Series 65 Optical Smoke Detector – Flashing LED

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch options

Related Standards:

Series 65 Optical Smoke Detector

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch options

Related Standards:

AlarmSense Heat Detector (A1R)

The AlarmSense Heat Detector (A1R) has a fixed upper limit, but in addition, measures the rate of increase in temperature. Can be used for applications where smoke detectors are unsuitable Ideal environments that are dirty or smoky under normal conditions 360°C visibility of LEDs Reduction of false alarms Quick and simple installation

Related Standards:

Orbis Marine Heat Detector (A1R)

The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms the device is operating. SensAlert®, yellow flashing LED indicates faulty operation FasTest® takes just four seconds to test and confirm detectors are functioning correctly

Related Standards:

Orbis Marine Heat Detector (A2S)

The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms the device is operating. SensAlert®, yellow flashing LED indicates faulty operation FasTest® takes just four seconds to test and confirm detectors are functioning correctly

Related Standards:

Fig 542 Safety Relief Valve

The NABIC Fig 542 is an extremely versatile valve and although designed primarily for the protection of hot water boilers, its wide range of applications make it an ideal general purpose safety valve. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. High degree of seat tightness Diaphragm protected parts WRAS Approved

Related Standards:

Fig 500 High Lift Safety Valve

The NABIC Fig 500 is designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. WRAS Approved Resilient PTFE seating design Easy inspection and cleaning High discharge capacity

Related Standards:

Fig 500SS High Lift Safety Valve

The NABIC Fig 500SS safety valve wetted parts are all manufactured from stainless steel. Used where a high discharge capacity is required on system fluids that can not come in to contact with gunmetal parts during normal system operation. Designed and tested to BS EN ISO 4126 -1. High discharge capacity Ease of inspection and cleaning. Resilient PTFE seating design Pressure setting locked and sealed

Related Standards:

Fig 500L Pressure Relief Valve

The NABIC 500L is designed primarily for use where high tightness is required on the discharge side, having a sealed spring cover to prevent the possibility of back pressure leakage through the top of the valve. The lift is progressively proportional to flow. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. High discharge capacity Pressure tight on discharge side Suitable for liquids and inert gases

Related Standards:

Fig 542L Pressure Relief Valve

The NABIC Fig 542L has been designed primarily for use where high tightness is required on the discharge side, having a sealed spring cover to prevent the possibility of back pressure leakage through the top of the valve. The lift is progressively proportional to flow. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. High discharge capacity. Pressure tight on discharge side Suitable for liquids and inert gases

Related Standards:

Fig 500T Combined Pressure & Temperature Relief Valve

The NABIC Fig 500T provides protection against excess temperature as well as pressure protection. It automatically discharges hot water to prevent a predetermined set pressure and / or temperature being exceeded. Each of the lift mechanisms is independent of each other. Designed and tested to BS EN 4126, BS 6283 (when 50% of BS EN ISO 4126 -1 ratings at 1 bar or temperature ratings are used). Resilient Viton soft seat design Powerful thermostat

Related Standards:

Fig 568 Anti-Vacuum Valve

The NABIC Fig 568 gunmetal Anti Vacuum Valve is set to open at a vacuum pressure of 50mbar. A dust cap prevents entry of foreign matter. PTFE to metal seating Gunmetal

Fig 520 High Lift Safety Valve

The NABIC Fig 520 flanged valve has been designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. Resilient PTFE seating design Separate outlets reduce effects of back pressure High discharge capacity

Related Standards:

McCannalok (Series-40-45)

The Series 40-45 double offset (also known as high-performance) butterfly valves are precision designed to operate in high pressure, high temperature and critical service applications. The energized resilient seat design provides bidirectional zero-leakage shutoff throughout the full pressure range to deliver quality, value and reliability in the most demanding applications. The pressure-assisted sealing is energized by line media pressure, providing a tighter seal in higher differential pressure services. The optional fire-safe seat design consists of the standard bidirectional resilient seat assembly with added Inconel® metal seat. A true optional metal seat design for control application is also available as well as a high-cycle configuration that has been rigorously tested to 1 million cycles.

Related Standards:

Series 20/21

The Series 20 (wafer) and Series 21 (lug) resilient seated butterfly valves feature a two-piece body. Available in a wide selection of high-quality seat and disc materials for a variety of applications, our Series 20/21 butterfly valves are easily automated for on/off or modulating service. Maximum Operating Pressure: 10 bar

Related Standards:

Bridon® Dyform® 34LR

Dyform® 34LR is a series of high-performance compacted crane ropes. This rope combines varying multi strand ropes designs to achieve excellent rotation resistance in high lift operations. We also offer our 34LR product with an internal plastic also known and referred to as plastic injection (PI). Plastic injection offers a range of benefits including increased bend & fatigue resistance while increasing core stability. This rope is available in both bright and galvanised finishes with various rope tolerances and lubrication specifications.

BW - CCG

Captive Cone Gland® for SWA and Aluminium Armoured Cable

Related Standards:

Stack Emission Testing per ISO-8178

Are you confident that your propulsion configuration meets its performance standards? Does your change in bunker strategy require a precise data-driven impact analysis? Do you want to verify the GHG emission reduction potential of switching to biofuels or fuel additives? Or are you looking to ensure accurate Specific Fuel Oil Consumption (SFOC) and GHG emissions at different engine loads? Many ships carry a CEMS (Continuous Emissions Monitoring System) that measures gas contents from the stack. This may need calibration to validate its measurements.

Related Standards:

Scrubber Exhaust Washwater Testing

To comply with the IMO’S 2020 Sulphur Cap, scrubbers are being used frequently to remove contaminants from a vessels’ exhausts by spraying a buffer solution (usually seawater) over exhaust gases. A byproduct of these Exhaust Gas Cleaning Systems (EGCS) or scrubbers, is a lot of exhaust Washwater which is discharged overboard. That washwater needs to be tested annually: it can be much more acidic than the surrounding seawater and contains polycyclic aromatic hydrocarbons, particulate matter, nitrates, nitrites, and heavy metals including nickel, lead, copper, and mercury. Therefore, releasing this water may have toxic impacts on marine life. For this reason, several countries require you to collect this washwater and have it analyzed in a laboratory. You can book your Scrubber Exhaust Washwater Test now to keep your fleet compliant and be able to present all documents to Port State Authorities.

Global Drinking Water tests for healthy crews

According to the WHO (World Health Organization) Ship Sanitation Guidelines, every vessel’s drinking water must be tested at least twice a year. Additionally, vessels that still generate plastic waste will need to comply with the Marine Litter regulation from MEPC.310(73) to achieve Sustainable Development Goal 14, which mandates the elimination of marine pollution from plastic waste by 2025. Our testing program offers a safe and economic solution, providing peace of mind for you and your crew.

D-2 Commissioning Testing of BWTS

Commissioning Testing validates the installation of the BWTS by demonstrating that its mechanical, physical, chemical and biological processes are working correctly – as per the design specifications or so-called Type Approval. If your ship(s) uses a Ballast Water Treatment System (BWTS) you must comply with international regulations for ballast water management, including conducting a Commissioning Test on your newly installed BWTS.

1 Sheave Overhead Travelling Crane

Safety Factor: 4 times Finish: Painted Temperature Range: -40°C up to +180°C / -40°F up to 356°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 Several options for painting according ISO 12944 on request. Proof Load Certificate on request. Non-standard sizes or custom products available on request. Key features Single or double hook Hooks are according to DIN15400

2 Sheaves Overhead Travelling Crane

Safety Factor: 4 times Finish: Painted Temperature Range: -40°C up to +180°C / -40°F up to 356°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 Several options for painting according ISO 12944 on request. Proof Load Certificate on request. Non-standard sizes or custom products available on request. Key features Single or double hook Hooks are according to DIN15400

4 Sheaves Overhead Travelling Crane

Safety Factor: 4 times Finish: Painted Temperature Range: -40°C up to +180°C / -40°F up to 356°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 Several options for painting according ISO 12944 on request. Proof Load Certificate on request. Non-standard sizes or custom products available on request.

6 Sheaves Overhead Travelling Crane

Safety Factor: 4 times Finish: Painted Temperature Range: -40°C up to +180°C / -40°F up to 356°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 Several options for painting according ISO 12944 on request. Non-standard sizes or custom products available on request. Key features Single or double hook Hooks are according to DIN15400

Hookblock Speed Reeve

Safety Factor: 4 times Finish: Painted Temperature Range: -40°C up to +180°C/ -40°F up to 356°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 Non-standard sizes or custom products available on request. Proof Load Certificate on request. Key features Single or double hook Hooks according to DIN15400 Available in any size With or without dead-end becket

Single Hooks

All our Single Hooks are available on request. Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204, Proof Load Certificate

Open Spelter Socket

The Open Spelter Socket from the standard series has a wide range of applications as a steel wire rope socket for general use in any situation and under various conditions. If the minimum breaking load of the wire is not higher than that of the Open Spelter Socket, a 100% breaking load of the socket-wire combination is guaranteed. All Open Spelter Sockets come with a (safety) pin . For more information about the Open Spelter Sockets see our ‘Warning & Application Instructions‘. Your wire supplier can provide you with information about the minimum breaking load of the Open Spelter Socket with wire. To guarantee that our product information is uniform and up-to-date, these product specifications of the Open Spelter Sockets are also presented in English. Material: Cast steel Working Load Limit: 20% of the MBL Finish: Painted or Galvanised (<Type No. 100 standard galvanised) Temperature Range: -40°C up to 200°C / -40°F up to 392°F Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204 These Sockets include our non-rotating system (NRS-system) which prevents the tamp from turning or slipping out of the cone and guarantees a high performance connection. Non-standard sizes or custom products available on request.

Related Standards:

CR Socket DNV & ABS

Material: Cast Steel – Grade 4 Working Load Limit: 20% of the MBL Finish: Painted Temperature Range: -40°C up to +200°C / -40°F up to 392°F Standard Certificates: Certificate of Conformity, 3.2 Material Certificate EN 10204, DNV-0S-E304/ABS Mooring Non-standard sizes or custom products available on request. Key features With pin or with safety pin Rope Ø min. 1 ¼ – 1 ⅜ inch – max. 5 inch Rope Ø min. 31-36 mm – max. 122-130 mm

CGD50

CGD50 is a standard gas detection control system with a standard Control Panel. It is designed for stationary gas detection installations for the monitoring of explosive and/or toxic gases and oxygen with 4, 8 or 12 gas detectors. In case you have a more demanding requirement please ask for our CGD 50 Custom (up to 254 gas detectors, additional outputs, interfaces, special cabinets, etc.).

CN-H/CS 84C HEAT IP-ADAPT IP67

Addressable heat detector moulded with IP-ADAPT base adapter (IP67). For harsh environments use the IP BASE. EN54-5 classification CS (fixed 84 °C).

Related Standards:

ST450EC

The ST450EC is an all-round gas detector which functions well under the most difficult circumstances. The heart of the detector is a replaceable gas sensor, which is available for Oxygen, Toxic gases and Hydrogen. The measuring principle is based on an electrochemical sensor, which is developed to meet the highest standards. The sensor has an outstanding stability, which achieves long-term reliability. The high selectivity of the sensors minimalizes “false” readings. The ST450EC comes standard with a graphic display. The display shows the measured value and various status notifications locally. The capacitive key control gives you an experience similar to a touchscreen and enables easy navigation through the user/calibration menu.

Related Standards: