All Products
Products
Gray Vehicle Support Stands are built to meet or exceed ASME PASE-2014 standards. The positive pinning stands are safe, durable and long-lasting.
View Product
Gray Vehicle Support Stands are built to meet or exceed ASME PASE-2014 standards. The positive pinning stands are safe, durable and long-lasting.
View Product
Gray Vehicle Support Stands are built to meet or exceed ASME PASE-2014 standards. The positive pinning stands are safe, durable and long-lasting.
View Product
Depending on the model of choice, these lifts usually consist of two or three InGround hydraulic lifting pistons installed in a modular or continuous trench in a direct line with one other and are consistent with a vehicle’s central axis. Each piston is driven by a high-pressure cylinder enclosed within the pistons structure and is equipped to safely engage a vehicle’s lifting points. Depending on the model the front and center lifting pistons are capable of moving along the same axis to create the appropriate space needed for any vehicle to be situated onto its lifting points. The pistons move using a twin chain, pneumatically driven Z-drive. The rear lifting cylinder is fixed and non-movable with a retractable saddle or adapter. Main features of high-pressure in-ground lifts include: PLC Controlled & Hydraulically Operated. 10 5/8″ Chrome Plated Pistons. Multi-position Safety locking legs with automatic air latch system. One small motor & pump per piston. Double chain hydraulic spotting system. Front/Center frames made from 7/8″ thick forklift mast channel. Adjustable pickup adapters. 3/8″ Thick cover plates (retractable covers optional) Fiberglass coated piston casings. (optional) Low profile saddle. (front and center recessed – optional) Pendant Control. (optional)
View Product
PKS Mid-Rise Air Hydraulic mobile lifts come in a two-column configuration with a 28” rise. These models are available in 24,000, 36,000 and 48,000 lb. total capacities and require a min of 90 PSI working air pressure. This PKS Mid-Rise series is manually operated and hydraulically equalized but can be fitted with optional pneumatic controls. Eight mechanical lock positions with single point lock release. Adjustable forks for tires ranging from 22” to 48” diameters. Air hydraulic lifting with one 4 HP air/hydraulic vane style pump. Large spring-loaded wheel casters for easy mobility on all surfaces. Includes standard bumper lifting adapter and adjustable forks. Can be ordered with forklift truck lifting ramps and adapters. Available with optional wider and/or longer forks.
View Product
Four Post Lifts allow for complete under-vehicle access. Without any side obstructions, these lifts are designed for a variety of maintenance needs. PKS offers 4-Post lifts that are a safe and cost-effective solution for routine maintenance of your entire fleet. While available in a wide range of lifting capacities ranging from 15,000 lb. to 125,000 lb. for our standard ALI Gold Certified models, these lifts can be customized to lift capacities of up to 260,000 lb. PKS 4-Post Lifts come with optional “wheels-free” bridge jacks used to raise vehicle’s tires off the platform for quick wheel, brake and axle service. Order your PKS Heavy Duty 4-Post Lift and take advantage of our numerous options and accessories to make the most out of your lift while increasing productivity and keeping your shop running efficiently for years of trouble free service.
View Product
MEDIUM DUTY 4-POST LIFTS PKS offers Medium Duty 4-post lifts in 15,000 lb. and 18,000 lb. capacities suitable for all passenger cars and trucks, commercial vans and other light vehicles. Our PK15-4 and PK18-4 are available as general service flat decks or as alignment ready 4 post lifts that can be customized with runway lengths and various accessories to ensure you get the most out of your PKS lift. Manually controlled and hydraulically equalized. One hydraulic cylinder and four heavy gauge pulling cables. Constructed of maintenance free Structural Steel. Solid steel pulleys with sealed steel roller bearings. Safety locking legs on each post. One 2HP motor available in a range of voltages to suit your needs. Wide flange beam runways made with diamond plate, including front wheel stops. Gradually angled approach ramps made with diamond plate. Optional Open Front Design for cross-beam free construction. Available with Recessed Alignment Equipment (Radius Plates & Slip Plates). 24” wide runways with lengths from 17 ft. to 24 ft. Available with “wheels-free” bridge jacks used to raise vehicle’s tires off the platform for quick wheel, brake and axle service.
View Product
ZÖLLNER develops and manufactures state-of-the-art Makrofons for mainline rail and light rail vehilces, providing reliable and precise acoustic warning solutions specifically for safety-critical applications. Built to withstand the challanges of everyday rail operations, our Makrofons offer outstanding performance, durability, flexibility, and ease of use. Fully compliant with key railway standards, including UIC 644, EN 15153-2, EN 15153-4, GMRT, and AS requirements, our products are also certified as Interoperability Constituents (IC) by a Notified Body (NoBo).
View Product
The ZÖLLNER ZET horn was the first piston-driven ship's horn on the market, powered by a 3-phase motor. Power from the motor is transmitted to the piston via gears, crankshaft, and connecting rod. This piston oscillates at a specific frequency, which, through the resonance of the horn and the moving air, produces a full, wide-band sound.
View Product
The SRD 414/4 is an acoustic-electronic navigation aid designed to enable officers on a fully enclosed bridge to perform the observation function required by COLREG 1972. The entire unit consists of a mast with five integrated microphones and a control unit with a loudspeaker and visual display. The device complies with the requirements of the European MED Directive 2014/90/EU of 23 July 2014.
View ProductCertified Products
A certified product is one that has been independently tested and verified by a third party to meet established safety, quality, or performance standards, demonstrated through a certificate or conformity mark.
Latest Standards Added
ASME PASE
Safety Standard for Portable Automotive Service Equipment
ANSI/ALI ALCTV-2017
Standard for Automotive Lifts - Safety Requirements for Construction, Testing and Validation
EN 15153-4
Railway applications - External visible and audible warning devices - Part 4: Audible warning devices for urban rail
COLREGS 1972
Convention on the International Regulations for Preventing Collisions at Sea, 1972 (COLREGs)
ISO 11426
Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)
ISO 15093
Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES
ISO 15096
Jewellery and precious metals — Determination of high purity silver — Difference method using ICP-OES
ISO 21001
Educational organizations — Management systems for educational organizations — Requirements with guidance for use
Latest Manufacturers Added
Relevant Standard Groups (63)
FRP Testing, Inspection ,QA/QC
0 of 8 standards in results
Quality controls help validate dimensions, cure, visual integrity and performance of FRP components before delivery or installation.
Adhesives Coefficient Friction Testing
0 of 12 standards in results
Assistive products and equipment
0 of 34 standards in results
Assistive products and equipment
ASTM Standard Test Method
0 of 313 standards in results
An ASTM Standard Test Method is a definitive procedure that produces a test result. It details precise instructions for apparatus, sample preparation, test execution, and calculations so that results are consistent and reproducible globally.
AWWA Water meters
0 of 10 standards in results
Water meters according AWWA
Baby Pacifier Drinking Equipment
0 of 6 standards in results
camping gas
0 of 2 standards in results
Child-resistant packaging
0 of 7 standards in results
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
Children's safety , Juvenile Products
0 of 52 standards in results
COMMERCIAL COOKING CODES AND STANDARDS
0 of 65 standards in results
concrete
0 of 20 standards in results
The 'Concrete' product group encompasses a variety of standards related to the manufacturing, testing, and application of concrete products. These standards ensure the quality, durability, and safety of concrete used in construction, drainage, and infrastructure projects.
Definition and Regulation of Vertical Reciprocating Conveyors (VRCs)
0 of 2 standards in results
It is the intent of the VRC Subcommittee of the Conveyor and Sortation Systems Product Section of the Material Handling Industry of America to place into the hands of VRC equipment suppliers, installers, end users, inspectors and any other Authority Having Jurisdiction (AHJ) a clear and definitive argument as to the validity of applying only ASME B20.1 to Vertical Reciprocating Conveyors. Background At the center of the controversy and confusion are two types of elevating platforms that are governed by two separate industry safety codes: Material Lift Type A as defined and governed by ASME A17.1 – Safety Code for Elevators and Escalators, and VRCs as governed by ASME B20.1 – Safety Standard for Conveyors & Related Equipment .
Diving Standards
0 of 11 standards in results
DIVING SUITS
0 of 2 standards in results
Wet suits EN 14225-1 Dry suits EN 14225-2 Actively heated or cooled suit systems and components EN 14225-3 Constant wear suits/abandonment suits EN ISO 15027-3
electric bicycle/motorcycle batteries
0 of 7 standards in results
Elevator - USA
0 of 6 standards in results
Emergency Escape Breathing Device (EEBD)
0 of 21 standards in results
Emergency Escape Breathing Device (EEBD)
EQUIPMENT PROVIDING FOOT, LEG & ANTI-SLIP PROTECTION
0 of 0 standards in results
Safety footwear EN ISO 20345 Protective footwear EN ISO 20346 Occupational footwear EN ISO 20347 Footwear: Protecting against risks in foundries (Part-1) Protection against risks in welding and allied processes (Part-2) EN ISO 20349 Footwear for firefighters EN 15090 Protective footwear for motorcycle riders EN 13634 Footwear protecting against chemicals EN 13832 Parts 1-3 Live working: Footwear for electrical protection Insulating footwear and overboots EN 50321-1 Safety footwear with resistance to chainsaw cutting EN ISO 17249 EN ISO 11393-3 Anti-slip devices No harmonized requirement or standard SGS in-house testing method
Fire Curtains & Smoke Curtains
0 of 16 standards in results
FIRE DETECTION
0 of 9 standards in results
EN54-25 wireless certification EN54-5 Heat Detection certification EN54-7 Smoke detection certification EN54-23 Visual Alarm certification EN54-3 Sounder certification
FRP Ducting and Exhaust Systems
0 of 7 standards in results
FRP ducting is used for vapors, gases and corrosive environments where resin selection, chemical barrier and laminate performance are critical.
FRP Gratings Standards
0 of 4 standards in results
FRP gratings may be selected for traffic areas, platforms and access structures where strength, safety and performance in corrosive environments are required.
FRP Piping & Fittings Standards
0 of 14 standards in results
FRP piping systems may be evaluated under standards for pressure pipe, filament-wound pipe, material designation and industrial applications.
FRP Tanks & Vessels Standards
0 of 9 standards in results
FRP tanks, vessels and process equipment may be manufactured considering recognized standards for corrosion-resistant equipment, chemical storage and industrial service.
Furniture
0 of 29 standards in results
GAS APPLIANCE
0 of 16 standards in results
EU Commission Implementing Decision (2024/224) about harmonized standards for gas-burning appliances in the European Union
Gas Cylinder
0 of 17 standards in results
The 'Gas Cylinder' product group encompasses various standards that dictate the safety, performance, and manufacturing guidelines for gas cylinders and related equipment. This group includes regulations for cylinder materials, valves, and safety devices to ensure reliability and compliance in gas service applications.
Glass Fiber Reinforced Polyester Pipes GRP STRUCTURAL MANHOLE
0 of 30 standards in results
HAND & ARM PROTECTION
0 of 0 standards in results
Protective Gloves – general requirements and test methods EN ISO 21420 Oven gloves and mitts, and pot- holders EN 407 Protective gloves against cold EN 511 Protective gloves for motorcycle riders EN 13594 Protective gloves against chemicals and microorganisms EN ISO 374 Parts 1-5 EN 16523-1 Protective gloves and other hand protective equipment against thermal risks (theat and/or fire) EN 407 Protective gloves against mechanical risks EN 388 Protective gloves for firefighters EN 659 ISO 15383 Protective gloves for welders EN 12477 Protective gloves for users of handheld chainsaws EN ISO 11393-4
head face body eye ear Respiratory protection
0 of 29 standards in results
safety protection heat protection welding protection Ear Protection body protection hand protection noise protection
HEAD PROTECTION
0 of 0 standards in results
Helmets for industrial use EN 397 ANSI Z89.1 Industrial bump caps EN 812 Industrial protective headwear CSA Z94.1 Occupational protective helmets AS/NZS 1801 Electrically insulating helmets EN 50365 Roller sports EN 1078 CPSC1203 ASTM F1447 Helmets Used for BMX Cycling ASTM F2032 Helmets Used for Downhill Mountain Bicycle Racing ASTM F1952 Helmets for use on bicycles and wheeled recreational devices AS/NZS 2063 Horse riding sports EN 1384 ASTM F1163 AS/NZS 3838 Snow sports EN 1077 ASTM F2040 Ice hockey EN ISO 10256 ASTM F1045 Ice Hockey Helmets CSA Z262.1 Children’s helmets EN 1080 Canoeing and whitewater sports EN 1385 Airborne sports EN 966 Mountaineering EN 12492 Cricket BS 7928 Helmets Used in Ice Speed Skating (Long Track) and Short Track Speed Ice Skating (Not to Include Hockey) ASTM F1849
HEAD PROTECTION
0 of 11 standards in results
Helmets for industrial use EN 397 ANSI Z89.1 Industrial bump caps EN 812 Industrial protective headwear CSA Z94.1 Occupational protective helmets AS/NZS 1801 Electrically insulating helmets EN 50365 Roller sports EN 1078 CPSC1203 ASTM F1447 Helmets Used for BMX Cycling ASTM F2032 Helmets Used for Downhill Mountain Bicycle Racing ASTM F1952 Helmets for use on bicycles and wheeled recreational devices AS/NZS 2063 Horse riding sports EN 1384 ASTM F1163 AS/NZS 3838 Snow sports EN 1077 ASTM F2040 Ice hockey EN ISO 10256 ASTM F1045 Ice Hockey Helmets CSA Z262.1 Children’s helmets EN 1080 Canoeing and whitewater sports EN 1385 Airborne sports EN 966 Mountaineering EN 12492 Cricket BS 7928 Helmets Used in Ice Speed Skating (Long Track) and Short Track Speed Ice Skating (Not to Include Hockey) ASTM F1849
Heat pumps and air conditioners
0 of 6 standards in results
Heat pumps and air conditioners
Important ISO Standards for Composites
0 of 28 standards in results
Important ISO Standards for Metals
0 of 27 standards in results
Important ISO Standards for Plastics
0 of 51 standards in results
Important ISO Standards for Rubber and Elastomers
0 of 6 standards in results
Important ISO Standards for Textiles
0 of 22 standards in results
Important ISO Standards for the Medical & Pharmaceutical Industry
0 of 38 standards in results
Important ISO Standards for the Paper Industry
0 of 38 standards in results
Industrial Burners
0 of 15 standards in results
Industrial racking and shelving
0 of 9 standards in results
FEM Racking and Shelving relevant CEN Stanadarts
Instrument transformers
0 of 5 standards in results
Methods for Industrial Emissions, Outdoor Air Quality, and Occupational Health Air Sampling
0 of 15 standards in results
Air quality is a critical aspect of environmental and occupational health. Understanding the applications and methods for industrial emissions, outdoor air quality, and occupational health is essential for ensuring the well-being of both the environment and the people exposed to various air pollutants.
MOUNTAINEERING TOOLS/EQUIPMENT
0 of 0 standards in results
Mountaineering equipment – Harnesses EN 12277 Climbing and Mountaineering - Carabiners ASTM F1774 Mountaineering equipment - Connectors EN 12275 Mountaineering equipment - Accessory cords EN 564 Mountaineering equipment - Slings EN 566 Mountaineering equipment - Braking devices EN 15151-1 EN 15151-2 Mountaineering equipment - Rope clamps EN 567 Mountaineering equipment – Ice tools EN 13089 Mountaineering equipment - Tape EN 565 Mountaineering equipment - Pitons EN 569 Mountaineering equipment - Crampons EN 893 Mountaineering equipment - Rock anchors EN 959 Mountaineering equipment - Chocks EN 12270 Mountaineering equipment - Frictional anchors EN 12276 Mountaineering equipment - Pulleys EN 12278 Mountaineering equipment - Individual safety systems for rope courses EN 17109
NSF Certified Food Equipment
0 of 18 standards in results
NSF 2 NSF 3 NSF 4 NSF 5 NSF 6 NSF 7 NSFI 8 NSF 12 NSF/ANSI 13 NSF 18 NSF 20 NSF 21 NSF 25 NSF 29 NSF 35 NSF 37 NSF 51 NSF 52 NSF 59 NSF 169 NSF P149 NSF P155
oil & gas
0 of 170 standards in results
ISO technical committees for use in the oil&gas industry
plastic pipe
0 of 10 standards in results
The 'plastic pipe' product group encompasses various standards pertaining to the specifications, testing, and applications for pipes made primarily from plastic materials, such as polyethylene and polypropylene. These standards ensure the quality, safety, and performance of plastic piping systems used in various applications, including water supply and drainage.
Plastic Pipe
0 of 16 standards in results
The 'Plastic Pipe' product group encompasses various standards relevant to the manufacture and use of pipes made from plastic materials, highlighting essential specifications and testing methods. These standards ensure quality, performance, and compliance across diverse applications in industry and construction.
pre cast
0 of 17 standards in results
The "pre cast" product group encompasses standards related to precast components used in various applications, including drainage and piping systems. This group particularly emphasizes the manufacturing and quality assurance of polymeric and composite piping systems that serve in infrastructural roles.
PROTECTION AGAINST FALLS FROM HEIGHT
0 of 0 standards in results
Full body harness EN 361 ISO 10333-1 SS 528: Part 1 Belts for work positioning and restraint, work positioning lanyards EN 358 Rescue harnesses EN 1497 Harnesses for Rescue and Sport Activities ASTM F1772 Sit harness EN 813 Connectors EN 362 Connectors with self-closing and self-locking gates ISO 10333-5 Personal fall-arrest systems SS 528: Part 5 Fall arresters (guided) including flexible anchor line EN 353 Parts 1-2 Fall arresters (retractable) EN 360
Pultruded FRP Profiles
0 of 5 standards in results
Pultruded FRP profiles are used in structures, platforms and applications where dimensional stability, low weight and corrosion resistance are required.
Quadricycle (EU vehicle classification)
0 of 11 standards in results
Solar thermal systems, storage, controllers
0 of 10 standards in results
Solar thermal systems, storage, controllers
solve fire risks posed by IBCs
0 of 4 standards in results
In early October 2011, as news helicopters patrolled overhead, fire and explosions destroyed a chemical blending plant1 in Waxahachie, Texas. During the disaster, a $1.2 million ladder truck from the nearby town of Ennis was completely engulfed in flaming liquid pouring from hundreds of ruptured intermediate bulk containers (IBCs) stacked in and near the plant. Like a scene ripped from a plant manager’s nightmare, firefighters narrowly escaped their burning truck and were forced to run from the flaming wave, as local and national TV viewers looked on. Fortunately, no injuries were reported; however, the plant and the fire truck were completely destroyed, and environmental clean-up of spilled chemicals cost millions of dollars. Introduced in the mid 1990s, the fire risks posed by IBCs became evident early on. One of the most popular configurations features a cube-shaped metal cage with a blow-moulded plastic bottle inside on a wooden or steel pallet. That type of construction fails quickly when exposed to fire. IBCs are widely used for the shipping and storage of almost any liquid, including fuels, process chemicals, hydraulic fluids, solvents, paints, coatings, adhesives, syrups, vegetable oils, waxes and polishes. Ignitable liquids stored in what are essentially plastic containers creates a serious challenge for risk managers. ‘When I started in field engineering many years ago, ignitable liquids stored in 55-gallon steel drums and some metal tote tanks were the main risks,’ notes John LeBlanc, vice president and senior engineering technical specialist in FM Global’s Chief Engineer’s Group. ‘Suddenly, we jumped from 55 gallons in a steel drum to 275 gallons or more in a plastic container. Even a relatively small heat source can rupture one of these composite IBCs, resulting in a large pool fire that can overwhelm sprinkler systems.’ https://ifpmag.com/new-solutions-help-solve-the-fire-risks-posed-by-ibcs/
spiral pipe
0 of 17 standards in results
The 'spiral pipe' product group comprises pipe structures manufactured using spiral welding techniques, suitable for diverse applications. Relevant standards ensure product quality, safety, and compliance with industry regulations for transportation and structural integrity.
SPORTS & LEISURE
0 of 0 standards in results
Roller sports EN 14120 Motorcyclists EN 1621 series EN 17092 series Football EN 13061 Martial arts EN 13277 Parts 2-4 Indoor sports EN 15613 Equestrian EN 13158 ASTM F 1937 Ice hockey CEN/TS 15256
Standards for crop-protection application equipment
0 of 15 standards in results
steel pipe
0 of 12 standards in results
The 'steel pipe' product group represents a collection of standards pertinent to the specifications, safety, and performance of steel piping systems. These standards ensure quality control and regulatory compliance in applications ranging from industrial to construction settings.
tests on personal protective equipment
0 of 13 standards in results
valves for gas
0 of 2 standards in results
waterslides playgrounds Swimming pool equipment
0 of 8 standards in results
design, installation, and operation of waterslides (EN-1069 and ASTM F-2376) and water playgrounds and areas (EN-17232 and ASTM F-2461).
WC accessories
0 of 8 standards in results