Sockets attached to steel wire rope, used for lifting, anchoring system, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc. Sockets are the strongest steel wire rope end fitting available, and if they are assembled in the proper way they can meet at least the breaking strength of the steel wire rope. Spelter sockets open, closed and wedge, SO1, SO2 and SO3 are used for lifting, rigging, towing and constructions. CR and CRD sockets, SO4 and SO6 are used in anchor lines for temporary and long term mooring between the chain and wire rope. Instructions for use Standard pins are normally used in non permanent and pick and place applications. Safety pins are used for more permanent applications or where the load may slide on the pin causing rotation of the pin. Resin: Before use please read carefully the instructions of the resin manufacturer. In case of incorrect use of the resin, our spelter material can result in an unsafe termination. More information can also be obtained from your wire rope supplier. Always clear the wire rope broom and socket basket from dirt and grease. Make certain that the broomed wires are evenly spaced in the basket, and that the wire and basket are aligned with one another.

The G940 is a low-pressure, compact, domestic meter regulator specifically designed for use with 1st, 2nd and 3rd family gasses. Ideally suited for use on metering installations, incorporating G2.5, G4 (U6) and E6 size meters and can be supplied as part of a metering solutions package. The G941 can be equipped with an Under Pressure Shut Off feature (UPSO).

The wider G1000 family of products are a low pressure, compact regulator for large commercial and industrial applications with excellent capacity capabilities. The G1000 links accurate pressure control, reliability, high efficiency and sensitivity with maximum flow and minimum pressure loss and is designed for use with 1st, 2nd and 3rd family gases. The regulators can be used on metering installations, commercial / industrial installations or OEM applications on burner or boiler trains.

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C. Reliable fire detection in areas with a wide temperature range from -20°C to +70°C Ideal for environments that are dirty or smoky under normal circumstances Unaffected by wind and atmospheric pressure

The XP95 Multi-Sensor Detector combines independent optical smoke and temperature sensors for better fire detection in areas with deceptive phenomena.

The RW1000-400APO is a wireless analogue addressable heat detector that can be configured as either rate-of-rise (A1R) or high temperature (BS) classification as specified in the EN 54-5. Multiple EN 54-5 classes (A1R and BS) can be chosen from configuration software or the keyboard/LCD interface during the link phase. Twin alarm, bi-colour LEDs for 360° visibility Programmable for rate-of-rise (A1R) or static temperature (BS) Bi-directional wireless communication Dual channel redundancy Ten year battery life Five year product warranty

The RW1500-120APO is a wireless addressable interface and conventional open-area wall sounder that can be used as a stand-alone notification device. Compatible only with REACH Wireless 16 tone pairs Four Volume Settings Bi-directional wireless communication Dual channel redundancy Five year battery life Five year product warranty

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature. Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty, smoky or steamy under natural conditions Flashing LED versions available

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch options

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state and produces a red light in alarm. Responds well to slow-burning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch options