The ‘FS’ Type Single Isolating Needle Valve is designed for safe and reliable isolation. It provides a bubble-tight shutoff, non-rotating and anti-galling tip and dynamic self-adjusting spindle seal to give long service life in various applications and is supplied with the Firesafe testing to BS6755

The BZR-REG-II pressure regulator is designed for industrial applications with burners and gas-air mixers. The BZR is certified with EN88-1 standards. Its main function is to maintain a stable fuel/air ratio by adjusting gas pressure according to combustion air pressure. Available in standard and hi

Fall arrest and work positioning harness with sternal attachment. In polyester, 44 mm wide, with 23 kN breaking force. It features: ATTACHMENTS: 1 dorsal ‘D’ attachment and 1 front/chest ‘D’ attachment; 1 ventral ‘D’ attachment, waist height, on front for rope access, and 2 lateral ‘D’ rings for wor

The EMB‑SIK‑DA series by ESA‑Pyronics consists of double air high‑speed gas burners designed for direct heating processes in industrial furnaces. Their defining feature is the silicon carbide (SiC) flame tube, which generates a compact, high‑velocity flame—between 60 and 120 m/s depending on the mod

The MasterGuard® 600 Series features a range of high flow rate valves that mix hot water with cold water to deliver water at a safe, controlled temperature, typically 120°F (49°C). It features state of art, fast-acting, high-quality thermostatic mixing valve elements that sense the outlet temperatur

alu star 80 / working platform: 0,75 m x 2,60 m alu star 80 is in accordance with DIN 4422-1. The max working height is 8.00 m outdoors and 12.00 m indoors. The ledgers distance of 0.25 m allows a flexible adjustment of the working heights to your individual needs. Inexpensive plywood/aluminium deck

Powder spray torch for thermal spraying with self-fluxing alloys and melting at the same time. Most types of metal can be coated with the the DURALOYPLUS torch, provided that the melting point is higher than the working temperature of the alloy. During the operation, the powder particels pass throug

Single phase isolating transformers are used as protection from electrocution of the users and for adjusting the voltage to the voltage required by the powered equipment. These transformers are built in accordance with Safety Standards for transformers IEC 61558 and are used in electrical cabinets

A highly compact respiratory protection device, designed specifically to assist firefighters evacuate civilians from high-rise buildings. It is equipped with a breathing unit and a self-adjusting strap for maximum comfort and usability and has CE certification. The 4NE1 offers short-term protection

The Direct Gas Fired Make-Up Air package is designed to deliver tempered make-up air for installations requiring frequent air changes. Units are designed for natural and propane gas applications, and for indoor or outdoor installation. Direct Gas-Fired Heater, for use in tempering make-up air. Pack

The Direct Gas Fired Make-Up Air package is designed to deliver tempered make-up air for installations requiring frequent air changes. Units are designed for natural and propane gas applications, and for indoor or outdoor installation. Direct Gas-Fired Heater, ETL Listed, for use in tempering make-

At Aquamatic we have dedicated years of research, engineering, and investment to give you the ultimate system at an affordable price. On the surface, most pool covers look similar …but the most important part of any pool cover is the mechanism. See why pool professionals, architects, and designers w

Devices that regulate the temperature of radiators by adjusting the flow of hot water based on room temperature.

The FW and FWC Valves are small, low-cost relief valves suitable for static over-pressure protection. Type FWC incorporates a calibrated adjusting screw for occasional changes in pressure setting without the use of a pressure gauge. Bronze bodies with male inlet and female outlet, silicone seats and