Full-lift angle spring safety valve with flanged ends. The body of the product may be made of: grey cast iron (DN 20-150 for pressure up to 16 bar and max. temperature 300°C or DN 20-100 for pressure up to 16 bar and max. temperature 120°C – for soft sealing disc nodular cast iron (DN 20-100 for pr

Full-lift angle weight safety valve with flanged ends. The product is characterized by a high degree of tightness. Valves 570 may be applied to systems in which the pressure is from 0.1 to 0.7 bar. The valve may be used in installations for the transport of steam, compressed air, aggressive media (d

Simple design, very compact and robust valve, this new version of JR Relief, Series CH, keeps the traditional features of spring actuated relief valve with diaphragm and spring actuation, but, as main new characteristics as very light weight, simplified maintenance with easy access to diaphagm, obtu

Gunmetal Safety Valve

Gunmetal Safety Valve.

The NABIC Fig 500T provides protection against excess temperature as well as pressure protection. It automatically discharges hot water to prevent a predetermined set pressure and / or temperature being exceeded. Each of the lift mechanisms is independent of each other. Designed and tested to BS EN

The NABIC Fig 542 is an extremely versatile valve and although designed primarily for the protection of hot water boilers, its wide range of applications make it an ideal general purpose safety valve. All wetted parts are manufactured from dezincification resistance materials. Designed and tested t

The NABIC Fig 500 is designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. WRAS Approved Resilien

The NABIC Fig 500SS safety valve wetted parts are all manufactured from stainless steel. Used where a high discharge capacity is required on system fluids that can not come in to contact with gunmetal parts during normal system operation. Designed and tested to BS EN ISO 4126 -1. High discharge ca

The NABIC 500L is designed primarily for use where high tightness is required on the discharge side, having a sealed spring cover to prevent the possibility of back pressure leakage through the top of the valve. The lift is progressively proportional to flow. All wetted parts are manufactured from

The NABIC Fig 542L has been designed primarily for use where high tightness is required on the discharge side, having a sealed spring cover to prevent the possibility of back pressure leakage through the top of the valve. The lift is progressively proportional to flow. All wetted parts are manufact

The NABIC Fig 520 flanged valve has been designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. Re

Full lift safety valves for steam and gases - standard safety valves for liquids, flanged ends, spring loaded, direct loaded, precise guiding. To relieve excess pressure from vessels, equipment and pipe systems under pressure. Specification of the range: Diverse design combinations by lifting device

High-Performance Protection Against Reverse Flow

API 594 Type B | API 6D | BS 1868 Design | For Horizontal and Vertical Installation Valvosider Swing Check Valves are designed to provide reliable one-way flow control in both horizontal and vertical piping systems, offering protection against reverse flow in critical applications. Manufactured acco

Floating ball valves are ideal for low to medium pressure applications where tight shutoff is crucial. The ball floats slightly downstream to press against the seat, ensuring a reliable seal. Trusted by top European valve manufacturers, these valves offer simplicity and efficiency. As leading ball v

Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

The McCannalok™ Cryogenic High Performance Butterfly Valve complies with various standards and certifications, including design standards like ASME B16.34, ASME VIII, and API 609; testing standards such as API 598, ISO 15848-1, and API 641; and certifications like ABS, ATEX, Bureau Veritas, CCS, DNV

Cast or forged globe valves manufactured in accordance with standards such as ISO 15761 (API 602), BS-1873, or ASME B16.34, tested in accordance with API 598 to guarantee the integrity of the body. They can be bolted, pressure-sealed, or welded, with diameters ranging from 1/2″ to 32″ and pressure c