The texture of a surface is an important factor in ensuring high quality parts. To achieve this, it is essential that it is precisely defined by means of standardized surface texture parameters. The ISO 21920 series of standards has been in force since 2022 and defines the parameters of roughness m

The GOLDLINE® product page mentions compliance with ASTM F405, ASTM F667, AASHTO M252, and AASHTO M294 standards. Additionally, it references ASTM D3350, ASTM D1056, ASTM D2321, and ASTM F449 in the product specifications.

Recognized worldwide, the API Monogram is a voluntary licensing program, which facilitates the consistent manufacturing of product conforming to the applicable API Specifications. With continuous years of good standing with API, and as a licensed manufacturer of the 4F Standard (since 2005), CARE I

The Open Spelter Socket from the standard series has a wide range of applications as a steel wire rope socket for general use in any situation and under various conditions. If the minimum breaking load of the wire is not higher than that of the Open Spelter Socket, a 100% breaking load of the socket

The product page for the Party Grill 400 R Gas BBQ & Stove does not mention any specific standard numbers, certifications, or compliance references. The page provides detailed product specifications, features, and dimensions but does not include information on technical standards or certifications s

The iCT1 product page mentions the following standards: - IEC EN 60044-1 - IEC EN 60044-2 - IEC EN 60044-5 - IEC EN 60044-6 - IEC EN 60044-7 - IEC EN 61869-x - ANSI/IEEE C57.13.1 These standards pertain to the testing of current and voltage transformers, as detailed in the product specifications.

The product page for AF-324 mentions the following standards and certifications: - **ISO 9001**: Quality management system certification. - **UL181**: Factory Made Air Ducts and Air Connectors standard. - **EN 13180**: European standard for ventilation for buildings – ductwork – dimensions and mech

Are you looking for a parking lift that offers maximum comfort and high efficiency? Then our S2.8 double parking system is the right product for you. Thanks to its horizontal platforms, the double parking system provides convenient entry and exit. Our design also requires minimal installation space,

The ChemFAST Sharp is a modern, high-performance chemical fume cupboard from FASTER, designed for connection to a centralised exhaust air system. Developed in accordance with the specifications of EN ISO 14175 Part 3-6, it offers maximum safety for the user - combined with energy-efficient airflow t

- With advanced manufacturing standards and specifications from Japan, common structural steel pipes are used to make structures for scaffolding, scaffolding, furniture, etc. - Each construction steel pipe is designed to suit certain uses. But in general, the outstanding advantages of this tube are:

The GOLDLINE® product page mentions the following standards and specifications: - ASTM F405: Standard Specification for Corrugated Polyethylene Drainage Pipe - ASTM F667: Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings - AASHTO M252: Standard Specification for

Block and Bleed Soft seated trunnion valve with Substar needle vent valve. Offered to ASME and API specifications. This Subsea valve range is designed for superb sealing for up to a depth of 10,000ft.

Floating pattern ball valve designed to API specifications, with a bore of 6mm – 13mm. This valve range is designed for light to medium subsea service for applications up to a depth of 1000ft.

The GOLDFLO® product page mentions the following standards and specifications: - **AASHTO M252**: Standard Specification for Corrugated Polyethylene Drainage Pipe - **AASHTO M294**: Standard Specification for Corrugated Polyethylene Pipe, 300 - 1500 mm Diameter - **ASTM F2306**: Standard Specificat

The GOLDFLO® product page mentions the following standards and specifications: - AASHTO M294: Standard Specification for Corrugated Polyethylene Pipe, 12" – 60" (300 – 1500 mm) Diameter - AASHTO M252: Standard Specification for Corrugated Polyethylene Drainage Pipe - ASTM F2306: Standard Specificat

The GOLDLINE® GLP product page mentions the following standards and specifications: - ASTM F667: Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings - ASTM D3350: Standard Specification for Polyethylene Plastics Pipe and Fittings Materials - AASHTO M252: Standard S

Windlass BOP Control Systems meet or exceed the most stringent quality standards including American Petroleum Institute specifications API 16D, RP16E & RP53 to assure safe and reliable operation under critical conditions. We provide BOP Control Systems for both onshore and offshore applications worl

At M Barnwell Services, we take pride in offering a vast selection of oil products. Whether you require standard sizes or bespoke specifications, our inventory has you covered. Our offerings include: Manufacturer Oil Seal Designs: A Types (R21, SC, SM), AS Types (R23, TC, BASL), and B Types (R4, BB

Sherwood KVAC Series post medical valves are used in cylinders for various medical gas applications. Valves are available with various inlets and outlet specifications with a chrome plated exterior.

The product page for the Poly Coated Steel Ag Catch Basin mentions the following standards: - AASHTO M252 - AASHTO M294 - ASTM F2306 - ASTM D3350 - ASTM D2321 These standards pertain to specifications for corrugated polyethylene pipes and fittings, as well as practices for their underground instal

These specifications and standards for fiberglass pressure pipe are a collaboration between the American Water Works Association and theAmerican National Standards Institute. This standard describes: the fabrication and the testing of nominal 1-in. through 156-in. (25-mm through 4,000-mm) fibergla

Complies with the specifications of UNE EN 12201. Polyethylene PE 100 pipes for the transport and distribution of pressurized water at temperatures not exceeding 45ºC, intended for human consumption and general use. FOOD GRADE .

We manufacture each vault to customer specifications in a quality-controlled factory environment that ensures optimum performance. Our plants meet rigid production and testing specifications for all federal, state and local standards, including ASTM and ASSHTO specifications. Precast concrete vault

The product page mentions several standards and specifications: - **Materials**: - Titanium Alloy TiAl6V4: NF ISO 5832-3 - Hydroxyapatite coating (HAC): NF ISO 13799-2, 3, 4 - Stainless Steel: NF ISO 5832-9 - Pure alumina ceramic: NF ISO 6474-1 - **Design Features**: - Low-profile design

Bedding and seating wire customised to customer specifications