Systems and solutions for e-bike charging

Consumer units, distribution assemblies and junction boxes complying with EN 60670 Standard

Pexal Gas is a multilayer pipe and fitting system for the transport of fuel gas in the domestic sector: international certifications obtained over the years on the Pexal Gas system in Italy, Australia, New Zealand and Ukraine testify to its reliability and quality. Valsir offers the widest range of

Distribution assemblies for industrial and construction site sectors complying with EN 61439 Standard

Standard: European Norm DIN EN 14800 represents high safety standards for corrugated metal gas hoses used in domestic appliances intended for use by individual householder inside or outside dwelling throughout Europe. This norm aims to improve the performance of the corrugated hose assemblies by def

Pre-assembled fastener systems designed to provide accurate and consistent tensioning in structural applications.

A wide range of assemblies and the variants derived are characteristic for RT return line filters. This filter series is thus predestined for all filtration tasks in the field of return oil and leak oil. Return line filters are available in the classic version as tank-mounted filter with filter head

EFS Multi-Blade fire damper is rated as a 3 hours fire damper for use in static systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat responsi

EFS Multi-Blade fire damper is rated as a 1-1/2 hour fire damper for use in static systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat respo

EFS Multi-Blade fire damper is rated as a 3 hours fire damper for use in dynamic systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat respons

AC-90® Cables from Atkore, sometimes referred to as BX cable, are a commercial wiring method favored by installers for their flexible interlocked steel armor, which provides mechanical protection. These versatile 600V cables with THHN conductors have certain construction limitations due to the incep

30 Amp, 125/250 Volt, 3P, 4W, LEV Series North American-Rated IEC 60309-1 & 60309-2 Pin & Sleeve Receptacle, Industrial Grade, IP66/IP67/IP68/IP69K, Watertight - Orange LEV Series IEC Pin & Sleeve Devices are designed to simplify your installation, endure the harshest environments and improve safet

Reusable Stainless Steel Hypodermic Needles Medical hypodermic needles (or needle assemblies) typically consist of a machined fitting joined to a fabricated tube. Most often, the tube is stainless steel and pointed or blunt (click on cannula link for more details). The worldwide hypodermic needle fi

VITALFLEX ® Vibration Eliminator / Pump Connector ANSI 150LB M/S Fixed Flanges Pump Connectors are flexible metal assemblies, primarily designed to isolate vibration from pumps on both the suction and discharge sides of the pump. They help to prevent damage caused by vibration, expansion and contrac

EFS-FC fire curtain consists of a control box, rollers, motors, fabric, bottom rod, side guides and electronic components. The curtains are installed in a unique, hidden and aesthetic method that assimilates them as an integral part of the building’s ceiling or wall so that it does not visually detr

ModuleGuard-VD T2, available in T2 grades I, III and IV, is the modular vault door solution to meet customer needs and required dimensions. The combination of lightweight, modular and high performance makes ModuleGuard-VD T2 range of vault doors unique. The vault door solution provides burglary-res

AMBICO Blast & Pressure Resistant Overhead Doors are highly engineered multi-leaf door assemblies designed to withstand a wide range of explosive pressures, including dynamic pressure. With a focus on providing exceptional blast resistance, these overhead doors combine blast-resistant panels with up

PTFE Ultra High Pressure Gas Cylinder Hose Use: The PTFE Ultra High Pressure Gas Cylinder Hose is the most advanced high-pressure hose on the market. It outperforms expectations with its exceptional routability, tight bend radius, and reduced outer diameter, making it ideal for high-pressure gas and

ModuleGuard-SR T2, available in T2 grades I, III and IV, is the modular strong room solution that can be built into your existing structure of building, even where floor load is limited. The combination of lightweight, modular and high performance makes the ModuleGuard-SR T2 range of strong rooms u

Atlantex’s Aerospace-grade braided Pyrotex Firesleeve has been optimized to provide superior protection to critical hoses, cables, tubes, wires, and assemblies in environments where high heat, direct flame, and molten splash pose system hazards. Aerospace-grade Pyrotex firesleeve is manufactured wit

Orifice plates are on of the most economical devices of measuring flow. SEIKO´s production range extends from standard size orifice plates, through orifice carrier and flange assemblies to customized meter runs. Typical orifice plate are supplied with a data tab welded to the plate. The majority of

ERG-H1 is a high- and medium-pressure regulator suitable for all types of gases: Natural Gas, LPG and non-corrosive gases. Mainly used in industrial applications with Natural Gas or as a first stage regulator (high pressure) in LPG. It can be equipped with a shut-off valve and an outlet pressure gau

Our ILDFA floor is built for durability and safety. They are engineered to withstand daily hangar wear and tear while ensuring superior fire protection. With high impact resistance, we offer durability and easy repair to keep your operations running smoothly and safely. Discover our seamless repair

The Omega PRS series consists of sanitary RTD assemblies with protection heads, designed for use in Clean-In-Place (CIP) and sanitary processes. These sensors are supplied standard with 1½" 16 AMP Tri-Grip™ fittings to assemble to like-style piping connections.