PLP is Galletti’s new range of air-cooled packaged chillers and heat pumps for outdoor installation equipped with a modulating scroll compressor driven by an inverter and characterized by the use of R290 refrigerant. R290 (Propane) is a natural refrigerant capable of guaranteeing one of the lowest G

The range consists of 20 air-water models available as chiller and heat pump, with cooling capacities from 50 to 380 kW. The range’s main strongpoint is its high efficiency, not only as time efficiency (Class A Eurovent in chiller and heat pump mode) but especially as seasonal efficiency, aiming to

PRE-INSULATED COPPER PIPE GREEN EN 12735-1 IGQ, PE-X POLYETHYLENE FOAM, EUROCLASSE B S2 D0.

PRE-INSULATED COPPER PIPE GREEN EN 12735-1 IGQ, PE-X POLYETHYLENE FOAM, EUROCLASSE B S2 D0.

The alloy SF-CuAl8 has been developed for welding copper alloys and for coatings on steel, steel castings, nickel alloys and for fixing works in artistic foundries. Excellent for metal spraying. This material offers a very high resistance to seawater-corrosion and to the most commonly used acids in

Rod To Tape Type ‘U’ Bolt Single Plate Clamps are designed to join various sizes of conductor tape to the earth electrode. Features: Material: High Strength Copper Alloy (body), 99.9% HD Copper (‘U’ bolt) Standard: BS:EN 62561-1 Class H, BS 7430 Tightening torque: 12Nm More Information: The clamps

Rod to Cable Clamps (GUV Type) are designed to join various sizes of cable to earth electrodes/rebars etc. They have a high resistance to corrosion and are mechanically strong to ensure a lasting connection. Features: Material: High Tensile Copper Alloy (body), 99.9% HD Copper (‘U’ bolt) Standard:

LEAD-FREE COPPER ALLOY GLOBE

LEAD-FREE COPPER ALLOY CHECK

Tee Clamps are designed for a three-way connection of lightning protection or earthing conductor. Features: Material: Copper alloy/aluminium Standard: BS:EN 62561-1, Class H Tightening torque: 12Nm More Information: When choosing a connector it is important to ensure: The connector is mechanicall

Square Clamps provide a four-way connection and are suitable for crossing over lightning protection cables in straight-through joints or ‘T’ connections to form a continuous cable network. Countersunk hole in the base for fixing the clamp in place. Features: Material: Aluminium/copper alloy Standar

110 Copper round bars is an excellent candidate for some processing techniques as well as both indoor and outdoor applications. When copper is exposed to natural elements, it will patina and develop a greenish or bluish hue over time. Commonly referred to as Electrolytic Tough Pitch Copper (ETP), c

Electrodes for resistance welding and butt welding applications, made from various copper alloys for optimal performance.

The DuraSeal® flue is manufactured from either 316L or 29-4C, a super-ferritic stainless steel designed for extreme resistance to chloride ion pitting, crevice corrosion and stress corrosion cracking, as well as general corrosion in oxidizing and moderately reducing environments. 29-4C and 316L are

PGC manufactures forged and machined parts in large quantities for the Oil and Gas Production and Drilling Industry: Subsea, Platform and Land. Bolts: Stud, Bonnet, Riser, Connector, 12-pt, Hex, Flange, Socket Nuts: 12-pt, Hex, Flange, Round, Slotted, Cap Washers: Flat, Bevel Materials: MP35N, 20Mo

PGC manufactures forged and machined parts in small and large quantities across most subsets of the Power Generation Industry: Rotor and Combustion Hardware for Gas Turbines, Steam Turbines and Wind Powered Turbines. Bolts: Stud, 12-pt, Hex, Flange, Socket Nuts: 12-pt, Hex, Flange, Round, Slotted,

Size: 2" (50mm) to 56" (1400mm) Class: 150# to 2500# Design: API 6D Ends: FF, RF, RTJ, SW, BW, NPT Bore: Reduced or Full Seat: Soft or Metal to Metal Materials: • Cast Carbon Steel : ASTM A105N, ASTM A 350 Gr. LF2; • Stainless Steel : ASTM A182 F316; • Duplex Stainless Steel : ASTM A182 F51; •

Micro hardness tester WIKI 90 CNC is a motorized and automatic system for Vickers, Knoop, or Brinell hardness testing with load cell technology, a high definition camera for indent auto-reading, and a motorized turret with 6 positions (4 steps for lens and 2 steps for indenters). Fully conforms to A

Trunnion Supported Fixed Ball Design, Available in Full or Reduced Bores. Features include Anti-blow-out Stem, Anti-static, Firesafe/Fire-tested, Lockable. Designs conform to API 608, API 6D, BS 5351, and ISO 17292 standards. Body styles include Two-piece and Three-piece. End connections are Flanged

Seat Supported Floating Ball Design, Available in Full or Reduced Bores. Features include Anti-blow-out Stem, Anti-static, Firesafe/Fire-tested, Lockable. Designs conform to API 608, API 6D, BS 5351, and ISO 17292 standards. Body styles include One-piece, Two-piece, and Three-piece. End connections

Model A21C is the cryogenic execution of the Valland floating ball valve, for small bore low-temperature duties from 1/2" to 8". Construction materials are selected among stainless steels, 6Mo, nickel alloys and titanium for low-temperature toughness; the valve features live-loaded stem packing, ant

Model A11C is the cryogenic execution of Valland’s trunnion mounted ball valve. The design principle is the same as the standard A11 — trunnion-supported ball with floating self-relieving or double piston effect seats — adapted for low-temperature service: materials are restricted to grades with pro

Aluminium wires and rods for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium acts as grain-refiner to improve both the bending and the corrosion resistance. Applications in the construction of ships, off-shore, storage tanks, railways and automotive industry. Downloa

A continous solid corrosion resisting Duplex wire for welding of austenitic-ferritic stainless alloys of 22% Cr, 5% Ni, 3% Mo types. OK Autrod 2209 has a high general corrosion resistance. In media containing chloride and hydrogen sulphide the alloy has a high resistance to intergranular, pitting an

Aluminum wires and rods containing 5% Mg for semi-automatic MIG and TIG welding using argon, helium, or Ar + H1 gas. Designed for welding AlMg and AlMgSi alloys. The weld metal is seawater-resistant. After anodizing, it produces a color similar to the parent material.