The GT series guiding tubes are accessories for Non-Steady-State Needle probes. They are intended to facilitate measurements in hard soils, concrete, cement and bentonite. Also in case of measurements on large quantities of samples one can use several guiding tubes and one single needle.

TPSYS20 is a user friendly system for the measurement of thermal conductivity using TP02 or TP08 thermal needle probes. The system is designed for high-accuracy measurements. It is particularly suitable for analysis of soils, thermal backfill materials, sediments, foodstuff, sludges, paints, glues a

TP02 is a probe that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at the highest accuracy level. It works in compliance with the ASTM D5334-14, D5930-97 and IEEE 442-1981 standards. The s

TP08 is a probe that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D5334-14, D5930-97 and IEEE 442-1981 standards. The TP08 i

The MTN02 performs fast measurements of the thermal conductivity and resistivity of soils. Measurement with MTN02 complies with ASTM D5334 and IEEE 442 standards. The system is primarily designed for laboratory (indoor) measurements but can also be used for on-site (field) measurements. MTN02 is ope

Reinforced sheathing in accordance with EN 545/598, even for highly aggressive soils and where there is a risk of stray current. Integral full protection - electrically insulating.

FTN02 Field thermal needle system performs accurate on-site (field) measurements of the thermal resistivity and thermal conductivity of soils. Measurements with FTN02 comply with ASTM D5334 and IEEE 442 standards. The system is specifically designed for surveys that require measurements from the sur

TNS02 efficiently and accurately performs on-site (field) as well as laboratory measurements of the thermal conductivity and thermal resistivity of soils. The system is a combination of our FTN02 and MTN02 systems. Measurement with TNS02 complies with ASTM D5334 and IEEE 442 standards. It is designe

Dripping hose made on low-thickness flexible pipe made of top quality polyethylene, with continuous labyrinth with fast water jets. Pluvio Tape represents the most advanced technological solution in drip irrigation. The labyrinth is welded during the extrusion phase and the water outlet hole is mad

Dripping pipe realized on a cylindrical pipe in polyethylene with fast water jets self-compensating, anti-siphon and anti-drain dripping device: The self-compensating dripper guarantees a perfect flow uniformity thanks to the silicone membrane inserted inside it, that acts as a mechanical brake. Th

Dripping pipe made on cylindrical polyethylene pipe with cylindrical dripper with turbulent flows. The dripper is made with large-section cavities which reduce the risk of blockages by exploiting the turbulence of the flows. It is symmetrical, patented and designed to be inseparably welded to the in

The GRSM shrink-fit sealing sleeve is used in low-pressure gas networks for the subsequent sealing of leaking crimp and screw-type socket connections. The longitudinally oriented sleeve consists of modified, molecularly cross-linked, and therefore infusible polyolefin and is coated on the inside wit

High molecular crosslinked polyethylene (PEX) with minimum bending radius of 6× the diameter at 68°F (20°C). Maximum operating temperature 180°F @ 100 psi (82°C @ 7 bar). Red printing for identification of hot water lines. The PureLink® Plus PEX-a tubing may be used with fittings that are compliant