The safes have a unique multi-layered structure which offers a high resistance to intrusion by tools and torch. The body and door are constructed of steel plates and are cast with Alchronite, ISM patented material and are reinforced with ISM patented special alloy grids which provide tool and torch

The safes have a unique multi-layered structure which offers a high resistance to intrusion by tools and torch. The body and door are constructed of steel plates and are cast with Alchronite, ISM patented material and are reinforced with ISM patented special alloy grids which provide tool and torch

The first safe in the world to receive Underwriter’s Laboratories (U.L.) label TL-30×6 The safes have a multi-layered structure which combines steel plates and cast concrete to create maximum strength and high resistance to intrusion. both body and door are reinforced with special alloy grids, an I

A safe that combines multi-layered steel plates and cast concrete to create maximum strength and high resistance to intrusion. The door is reinforced with special alloy grids, an ISM patent. The safes have a multi-direction boltwork mechanism and a double locking mechanism consisting of a combinatio

2-piece Body Full Port Chrome-Plated Ball Virgin PTFE Seats Adjustable Packing Nut Blow-Out Proof Stem MSS-SP-110 500 psig (1-¼”, 2″) for UL use CSA B125.14 (¼” – 2”) CSA ½, 5 & 125 psi (½” – 2″) CSA ½ & 5 psi (2½” & 3″) 29 in-Hg rating for Vacuum Service UL approved (½” – 2”) FM approved (½” – 2″)

The Aquamatic Ecology Unit is designed specifically for the removal of smoke and grease particles from the air stream of commercial kitchen exhaust systems and to eliminate or reduce odor to an acceptable level if equipped with the optional odor control section. The AM-PCU is designed for use with a

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Body and Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Grooved Ends to AWWA C606 Standard. Fusion Bonded Epoxy Coated Interior and Exterio

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

UL / FM at 350 psi, the highest rated pressure in the industry. Full Waterway design offers exceptionally low-pressureloss at high flow rates. Resilient Seated Design. Valve can be dis-assembled,and maintenance performed without removal from the pipeline. Face to Face dimension to ASME B16.1. Flange

The Clow Resilient Wedge Valve, with its unique features and benefits, was the first to be manufactured with both AWWA and UL/FM approval for all water system requirements. Clow Valve Co was the first to introduce, and still leads in the design and technical development, of the bubble-tight resilien

The Safeprotex Fiberglass Welding Blanket is crafted from heat-cleaned fiberglass, offering high strength, excellent heat resistance, and insulation properties. With a working temperature of 1022°F (550°C), it is suitable for general welding tasks and light to moderate spark protection. However, due

UL / FM at 300 psi. Single piece through shaft. The Weflo UL / FM Butterfly Valve – Wafer Style has a Vulcanized Disc design that provides bubble tight shut-off every time. Low torque operation – high cycle life. Gear Operated. Includes built-in Supervisory (Tamper) Switch. Fusion Bonded Epoxy Coate

UL / FM at 300 psi. Vulcanized Disc design provides bubble tight shut-off every time. Low torque operation – high cycle life. Gear Operated. Includes built-in Supervisory (Tamper) Switch. UL / FM Butterfly Valve – Grooved Ends to AWWA C606 Standard. Fusion Bonded Epoxy Coated Interior and Exterior t

UL / FM / AWWA Large Diameter Resilient Seated Gate Valves – Mechanical Joint x Mechanical Joint Ends. 14”-16”-18” Sizes are UL / FM at 250 psi rating. 20” and 24” are UL / FM at 200 psi rating. Manufactured to AWWA C515-15 Standard. Mechanical Joint Ends are to AWWA C111 / AWWA C153 Standard. Stain

Dry Pipe Valves for use as an automatic means of controlling water flow to automatic dry-pipe sprinkler systems. Vertical orientation. Peroxide cured EPDM with Fabric Diaphragm. NFPA 13 Standard. Latched Clapper Type. Air Supervisory Pressure Switches included. Rated Working Pressure 5 – 300 psi. CE

A trunnion-mounted valve series designed for high-pressure applications in the oil & gas and petrochemical industries. Available in sizes from DN 80 to DN 100 and pressure ratings up to ANSI 2500.

A trunnion-mounted valve series designed for harsh conditions in the oil & gas and petrochemical industries. Available in sizes from DN 150 to DN 250 and pressure ratings up to ANSI 600.

Double Wall Grease duct is ideal for use in kitchen ventilation applications where reduced clearance or zero-inch clearance to combustibles is needed. Grease duct is ETL listed to mastandard UL-1978 and UL Standard 2221 and rated for continuous operation at 500° F and intermittent operation at 2000°

The CaptiveAire Pollution Control Unit, PCU Series, is designed specifically for the removal of grease particles and abatement of smoke from the air stream of commercial kitchen exhaust systems. The unit, if ordered with the optional odor control section, will reduce odors from the air stream. The P

Glass designed to withstand handgun threats up to Level 3, providing ballistic protection.

UL Listed Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Flanged Ends to ANSI / ASME B16.1, Class 125. Other flanges available on request.

Design Features According to UL & FM All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges Bearings shall have an L-10 rating of