The Series 740 Knife Gate Valve complies with various standards and certifications, including MSS SP-81 for design, MSS SP-151 for testing, AWWA C520 for certification, ASME B16.5 and ASME B16.47 for drilling, PED Category I Module A, CRN, PE(S)R, TR CU, UA TR, and ATEX.

DN100-DN2000, • Pressure Class: PN 6 / 10 / 16 // ANSI 150, • Body: Epoxy coated GGG50, • Disc: Epoxy coated GGG50 / CF8M / AISI 316, • Seat: EPDM / NBR / Viton, • Operation : Lever / Gearbox // Pneumatic / Electric / Hydraulic Actuator, • According to TS EN 593 / API 609 / AWWA C504 standards.

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

UL / FM at 350 psi, the highest rated pressure in the industry. Full Waterway design offers exceptionally low-pressureloss at high flow rates. Resilient Seated Design. Valve can be dis-assembled,and maintenance performed without removal from the pipeline. Face to Face dimension to ASME B16.1. Flange

Pressure Relief Valve: Limits pipe line pressure by release excess pressure Pressure sustaining: Prevents pipe line pressure from rising to a maximum value Operates over a wide flow range Inlet pressure adjustment range: 65-180psi Can be maintained without removal from the pipe line Flanged to EN109

AMERICAN Flow Control's Series CV 2200 Swing Check Valves are in full compliance with ANSI/AWWA C508 with a rated working pressure of 350 psig. Configurations are available that are UL Listed with a rated working pressure of 350 psig.

AMERICAN Flow Control's Series CV 2200 Swing Check Valves are in full compliance with ANSI/AWWA C508 with a rated working pressure of 350 psig. Configurations are available that are UL Listed with a rated working pressure of 350 psig.

Lever and Weight Swing Check valves manufactured to AWWA C508 Standard. Resilient seated disc seals against integral bronze seat ring. Full waterway design. Available in 2” through 24” sizes, Flanged ends, ANSI B16.1, Class 125. 200 psi Water Working Pressure rating in sizes through 12”, 150 psi in

UL Listed Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Flanged Ends to ANSI / ASME B16.1, Class 125. Other flanges available on request.

The Waterous Classic Pacer by AMERICAN Flow Control merges a classic look with all the traditional features of the standard Waterous Pacer® design. The Classic Pacer is AWWA rated for 250 psig and meets or exceeds all of the requirements of ANSI/AWWA C502. Its ductile iron construction assures stre

The SEQUOIA™ fire hydrant, by AMERICAN Flow Control® incorporates more than a century of experience in design, manufacture and field experience from the iconic American-Darling and Waterous brands. This means dependable and efficient operation when needed. The SEQUOIA hydrant is rated at 350 psig

UL / FM Alarm Check Valves. 300 psi rating. High Strength Ductile-Iron Body. Stainless Steel Stem and Ring. The UL / FM Alarm Check Valve, Vertical Trim (Flange x Flange) is Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. Flanged ends to ANSI B16.1, Class 125, ASME B16.42, Cl

UL / FM Alarm Check Valves. 300 psi rating. UL / FM Alarm Check Valve, Vertical Trim (Flange x Groove) has a high strength ductile-iron body, with stainless steel stem and spring. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. Flanged end to ANSI B16.1, Class 125, ASME B16.4

Dual air release vents the accumulated small volumes of air during normal system operation. Allows venting of large volumes of air during pipeline filling. Provides protection from pipeline collapse due to vacuum. Flanged to ANSI B16.1, Class 125. Other flange types available upon request. Fusion Bo

Pressure Reducing Valve: Reducing a higher upstream pressure into a lower, constant downstream pressure Operates over a wide flow range Set Pressure is adjustable with single screw Can be maintained without removal from the pipe line. Flanged to EN1092-2 PN10/PN16, ANSI B16.1 Class 150 FF (Other ava