Thoracic Draining Chamber (single chamber) with watermark for fluid collection

Medical-Surgical procedure consists on placing the probe in the stomach through the nose. The tube has a hollow light that allows gastric secretion extraction as well as new solution insertion into the stomach It allows diet administration It allows drug administration

LithaBone HA 400 enables patient-specific implants with defined pore geometries. The material is resorbed by the body and replaced by new bone.

LithaBite AO 250 offers high strength, excellent surface properties and translucency for aesthetic, functional orthodontic applications, among others.

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

The CTR ASME Series is a trunnion mounted ball valve that offers a large range of applications. It features a split body, and uses C-RPTFE seats for maximum chemical compatibility combined with minimum coefficient of friction. It is a bi-directional, single piston effect, zero leakage valve and has

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

The CTR DIN Series is a trunnion mounted ball valve that offers a large range of applications. It features a split body, and uses C-RPTFE seats for maximum chemical compatibility combined with minimum coefficient of friction. It is a bi-directional, single piston effect, zero leakage valve and has a

FEATURE Standard port, 1/4″~2″ (DN8~DN50) W.P. : 2160 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device (option) Locking device ISO 5211 mounting pad Seal welded ends ASME B16.34 Wall thickness NACE MR0175 API 607 Fire safe approved API 608 Design Thread t

The Series M4 Severe Service Ball Valve is manufactured in an ISO 9001:2015 facility and is certified to the requirements of Annex III, Module H of PED 97/23/EC, TSG, CRN, and complies with ASME B16.34 and ASME TDP-1. Testing standards include API 598 and MSS SP 61. The valve features an ISO 5211 mo

The McCannalok™ Cryogenic High Performance Butterfly Valve complies with various standards and certifications, including design standards like ASME B16.34, ASME VIII, and API 609; testing standards such as API 598, ISO 15848-1, and API 641; and certifications like ABS, ATEX, Bureau Veritas, CCS, DNV

FBV cryogenic valves often use gate valves, globe valves, check valves, and ball valves. The design structure is selected according to the temperature of the user's working conditions. The valve body is designed in a wide range of stainless steel and alloy materials. The design and manufacture confo

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

Full Bore (Full Port) Pressure: 2000CWP (PN130) Temperature: Down to -196°C Pipe thread in accordance with NPT, Rp, Rc, G End to End: DIN3202 M3 length Investment casting body and cap Encapsulated body Long neck design Blow-out proof stem Anti-static design Locking device design Direct mounting pad

The GloveFAST Cyto Pharma isolator complies with the following standards and certifications: - **DIN 12980:2017-05**: Specifies requirements for isolators used in pharmaceutical applications. - **DIN EN ISO 14644-7**: Pertains to cleanrooms and associated controlled environments, focusing on isola

Single and Double-Wall Positive Pressure Special Gas Vent engineered for venting today’s high efficiency natural gas-burning or propane fired appliances, categories II, III and IV as defined by the Standard for Gas-Fired Central Furnaces, ANSI Z21.47 and NFPA 54.

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f

Full port Anti-static device Fire Safe design Blow-out proof stem Lever operated Mounting Pad ISO 5211

FEATURE Full port, 2″~24″ (DN50~DN600) W.P. : PN10 / 16 / 25 / 40 Class 150 / 300 / 600 W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device ISO 5211 Direct mounting pad Metal seat : 2063-MS (option) Flange dimension : ASME B16.5 EN 1092-1 Face to face : ASME B16

Full Bore (Full Port) Pressure: Class 300 Temperature: Down to -196°C Cavity Relief Hole Investment casting body and cap Long neck design Blow-out proof stem Viton O-Ring on stem Anti-static design Locking device design Direct mounting pad ISO 5211

Full Bore (Full Port) Pressure: Class 150, DIN PN16, DIN PN40 Temperature: Down to -196°C Cavity Relief Hole Investment casting body and cap Long neck design Blow-out proof stem Viton O-Ring on stem Anti-static design Locking device design Direct mounting pad ISO 5211

The Bray Series 5000/6000 3-Piece Ball Valve complies with several industry standards and certifications, including ASME B16.34 for design, ASME B1.20.1 NPT for threaded end connections, ASME B16.11 for socket weld end connections, API 598 for testing, MSS-SP 72 for shutoff rating, and ISO 5211 for

Main valve uses globe design for superior control characteristic. CanLeaf Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. Stai

Work with oxygen, acetylene, L.P.G. and non-combustible gases. Produced according to BS 5120, ISO 3821, EN 559, DIN 8541, SIS 278265, I.S. 714.