Silicone (VMQ) & Fluorosilicone (FVMQ) extruded (solid & sponge) on multiple extrusion lines Solid form - Durometer range from 20 to 80 Shore A Sponge – Soft, Medium, Firm, Custom Peroxide and platinum cure systems Translucent, transparent, standard colors, color matches Tubing sizes from .040″ to 3

Molded products include: O-rings Rubber grommets Rubber gaskets Rubber seals Over-molded parts with metal Bellows Spacers Connectors EMI/RFI shielding Nuclear radiation shielding (non-lead) Tubes and wraps Molded sponge sheets Special barrier coatings

Oliver Hydcovalves range of Ball Valves & Needle Valves have specifically been designed for use in hydrogen fuelling applications, the Hydcovalves range offers reliable operation and isolation at pressures up to 690 bar.

ASTM B571, EN 28510, ISO 8510-1, EN 1939, ASTM D2861, ASTM D3330, ASTM D6862, ASTM D6252 Peel procedure to determine adhesive strength between sample materials to a rigid layer A measured forced is applied to a test specimen in order to strip a layer from the specimen with tearing at the bonded surf

Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection and sampling for smaller sizes.

The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

The trunnion mounted side entry ball valve is the most popular ball valve design for Oil & Gas application. The ball is held on a fixed vertical axis and is free to rotate around it. Sealing is assured by pressure & spring energized seats. For small sizes, the ball is supported by a trunnion, while

Trunnion ball valves have the obturator bounded by trunnions which do not allow axial displacements of the ball itself in the flow direction; line pressure compresses the seat onto the ball, the contact between surfaces generates the valve sealing; trunnion standard construction ensure automatic cav

Sesame-A is a one lane type of full height turnstile gate. It ensures vandal proof security level to large variety of possible applications: stadiums, factories, parks, premises with highest security requirements etc. Strenght and durability is granted by robust fully welded design. On ther other ha

Block & Bleed, Ball Needle or Double Block and Bleed, Ball Needle Ball configurations, bar stock manifold with multiple Flange by Screw connection options, utilising soft seats, with flange to body connection for superior, bubble tight sealing capabilities at both high pressures and temperatures. Ut

Our Flanged Style Double Block & Bleed Valves are designed with a bolted 3 piece body and conventional through bolting flanged connections. The design reduces potential leak paths and allows weight and space savings when compared to conventional piping methods. Available in both full and reduced bor

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

Side-Entry (split-body) three pieces standard bolted body or compact design construction, Trunnion-supported, Floating seats spring energized, Full or Reduced Bore, Bi-Directional. Different Type of Bleed Connection is available: plugged, complete with blind flange or with needle / floating / trunn

The Top Entry ball valve design is characterized by one-piece body construction with top access to all internal components. Top Entry Ball Valves are the preferable solution when it is required to perform in line maintenance and when the reduction of possible leakage path is mandatory. The body can

Double Block and Bleed, Ball Needle Ball configuration, single flanged valve manifold utilising both soft seat and metal to metal seat, with bonnet to body connection for superior, bubble tight sealing capabilities at both high pressures and temperatures. Utilising the FE qualifications from the XC

Block & Bleed, Ball Needle or Double Block and Bleed, Ball Needle Ball configurations, bar stock manifold with multiple Flange by Flange connection options, utilising both soft and metal seats, with flange to body connection for superior, bubble tight sealing capabilities at both high pressures and

The slab gate valve (model B11) uses a single-piece gate with a full circular bore, running between two floating, spring-loaded metal-to-metal seats. Line pressure pushes the gate against the downstream seat, providing the seal; in open position the conduit is completely unobstructed, allowing piggi

The double expanding gate valve uses a two-piece gate-and-segment assembly: at full closure (and full opening) the two halves are mechanically wedged apart, pressing both seats against the body with a positive mechanical force that does not depend on line pressure. The result is a bubble-tight seal

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

The precision-made Cryogenic Bolted Gland Integral Ball Valve Double Block & Bleed utilising floating soft seat design with extended bolted gland isolation valves featuring a lipseal and a compact unit size with fewer potential leak paths. Available in a wide range of different materials to suit var

The Substar Single Isolate needle valve is PR2 qualified and hyperbarically tested. This Subsea valve range is designed for superb sealing for up to a depth of 10,000ft.